Sanyo DMP-M1200 Instruction Manual page 43

Symptom
Possible cause
Corrective action
The Removable Disk is not displayed when the unit is connected to the PC.
The PC and the unit are not connected correctly.
Connect them correctly.
Sufficient power is not being supplied from the PC.
If a USB hub is being used, reconnect the unit directly to the USB port on the PC.
If the PC is equipped with several different USB ports, try another port.
The USB driver is not installed properly.
Check the installation (only for Windows98/98SE operating systems, see page 7).
A network drive has been assigned.
If a network drive has been assigned, the drive letter (the letters used as drive
names) is already taken, so the Removable Disk cannot be created. Change the
network drive assignments and reconnect. Talk to your network administrator
about reassigning network drives.
FM broadcast cannot be received (recorded).
The headphones are not connected.
Connect the headphones.
[ENGLISH] 42