Advertisement
WARNING
This indicates that there is the risk of death or serious injury if the machines are handled improperly or
contrary to this indication.
Only use this device with the B-FP3D series portable printer.
Failure to do this may cause burst, ignition or overheat of the connected device
Do not excessively bend, damage, pull on, place heavy objects on, or heat the cable of this device.
This may cause fire or electric shock.
Do not remove covers, repair or modify the device by yourself.
This may cause fire or electric shock.
Do not connect or disconnect the plug of this device with wet hands.
This may cause electric shock.
Do not pour water directly onto the device or wipe it with dampened cloth.
This may cause fire or electric shock.
If the device produces smoke or strange smells, immediately unplug this device from the DC Plug.
Continued use of the device in such abnormal condition may cause fire or electric shock.
Fully insert the plug to the DC plug.
Failure to do this may cause fire or electric shock.
When disconnecting the plug, be sure to hold and pull the plug portion.
Pulling the cord portion may cut or expose the internal wires and cause fire or electric shock.
Disconnect the device from the DC plug when it is not used for a long period of time.
Failure to do this may cause fire.
Do not allow children to use this device.
Keep it away from children, or they may suffer from electric shock or injury.
Do not use the device where it might be exposed to:
▪ Direct sunlight
▪ Temperatures out of the specification
▪ High humidity
▪ Close to fire or moisture
▪ Dust
▪ Rapid temperature change
Using the device in such conditions may cause fire, electric shock, or injury.
Do not store the device where it might be exposed to:
▪ Direct sunlight
▪ Temperatures out of the specification
▪ High humidity
▪ Close to fire or moisture
▪ Dust
▪ Vibration
This may cause overheat or fire.
Do not use a spray cleaner containing flammable gas for cleaning this product, as this may cause a
fire.
Before using this product:
Please follow the instructions below to use the B-FP800-DCJA-QM-R correctly.
•
The B-FP800-DCJA-QM-R is a conversion cable designed for charging the battery
pack loaded in the B-FP3D series portable printer, not for supplying the power to the
B-FP3D portable printer.
•
Only use this device with the B-FP3D DC 12-19.5 V input. We are not responsible
for any results caused by a connection to any vehicles other than specified.
(We provided the conversion cable only)
•
Do not connect this device to any devices other than the
printer. We assume no responsibility for any results caused by a connection to other
devices.
•
Before connecting this device to the printer, please make sure that the battery pack is
in the printer. We are not responsible for any result caused by use of the printer
without the battery pack loaded inside.
If any difficulty should arise, unplug the unit and contact your Authorised TOSHIBA TEC
representative.
B-FP3D series portable
4
Advertisement
