Step 3. Set Up The Network Analyzer - Keysight N1930 B Series Installation Manual

Installing the VNA-Based Physical Layer Test System Hardware

Step 3. Set Up the Network Analyzer

Step 3. Set Up the Network Analyzer
1. Using the network analyzer's Installation and Quick Start Guide, set up the network analyzer.
2. If you are installing your network analyzer in an equipment rack, be sure to leave at least 2 rack
units of space below the analyzer to install the test set.
NOTE For the N4420B or N4421A/B test set, connect the network analyzer to the test set
before placing in the rack as a single unit on one set of rails. Refer to
the Network Analyzer to the Test Set
16
for instructions.
Step 4. Attach
Chapter 1