Adjusting Your Monitor Image; Using Direct Access Controls - Lenovo ThinkVision T27hv-30 User Manual

Adjusting your monitor image

Using direct access controls

2-3 T27hv-30 Flat Panel Monitor User's Guide
This section describes the control features to adjust your monitor images�
Direct access controls can be used when the On-Screen Display (OSD) is not displayed�
Icon Name
Enter key
Right key
1�
Left Key
Down Key
Up Key
Input Source
2�
Smart Traffic Light
3�
Power button
Teams button &
LED
Telephone switch
& LED
Volume down &
LED
Volume up & LED
Microphone mute
& LED
Note:
1�To learn more about Teams button features, please visit the following link
Use the Teams button on your certified Teams device (microsoft�com)
2�To enable Teams, Mute and Call buttons, you need to:
• Go to Settings in Teams app and select from Audio devices the Audio Echo Cancelling Speakerphone
• Connect the monitor with your laptop with USB-C cable�
Description
• Press to open main menu while there is no any OSD on the screen �
• Press to enter next level on main menu or sub menu , or enter previous
level on adjustment bar�
• Press and hold for 10 seconds, then the OSD will be Lock/Unlock�
• Press to enter next level on main menu or sub menu�
• Press to open Language select menu while there is no any OSD on the
screen�
• Press to exit current OSD or return to previous level�
• Press and hold for 10 seconds, then the DDC/CI function will be Enabled/
Disabled�
• Press to move to next item on menu�
• Press to decrease current value on adjustment bar�
• Press to open Contrast menu while there is no any OSD on the screen�
• Press to move to last item on menu�
• Press to Increase current value on adjustment bar�
• Press to open Brightness menu while there is no any OSD on the screen�
• It is a shortcut key for directly opening the menu of input source while
there is no any OSD on the screen�
• Press and hold for 3 seconds, then the Smart Traffic Light function will
be Off/On�
Turns the monitor on/off� White indicates power on� Orange indicates
standby/ power saving mode�
• LED will light in static white when Microsoft Teams® is signed in and
running�
• LED will blink when there is a Teams notification�
• Short press on the button to bring up Teams and open notification� Ensure
that the Teams application is signed in and is already running at the
background�
• Teams button Long Press in a meeting only will Raise/ Lower hand�
Note:Requires a Teams APP version with this feature�
• LED will blink in green when there is an incoming call�
• LED will light up in static green during call�
• Short press to answer / end call�
• Long press to reject incoming call�
Note: This feature can only be used with the Teams app�
• Short press to decrease volume�
• Long press the volume to continuously decrease�
• Short press to increase the volume�
• Long press to keep volume up�
• Press to mute and unmute the microphone�
• When the microphone is muted, the LED lights up static red�
• LED switches off when microphone is enabled/unmuted�