Set Temp. Range Limit - Toshiba RBC-AWSU52-E Owner's Manual

Set temp. range limit

The range of temperature settings can be set individually for operation modes.
NOTE
When "Error" is displayed
• In any of the operation modes, if the upper limit temperature is lower than the lower limit temperature, or if the lower limit
temperature is higher than the upper limit temperature, when [
[ Return] while it is displayed or leave it for 10 seconds to return to the condition prior to pressing [
Priority of "Set temp. range limit"
• When 2 remote controllers are connected, align the settings on the 2 remote controllers to use them.
• In the following cases, the operation may be outside of the "Set temp. range limit".
1) If "Set temp. range limit" is different on the 2 remote controllers that are connected.
2) If a temperature is set from the central control device that exceeds "Set temp. range limit".
1
In the "Energy saving" screen, press [
and [ ] to select "Set temp. range limit",
and then press [
2
Press [
temperature
 Press [
to change.
3
Press [
 Return to the "Energy saving" screen.
Set/Fix] is pressed, "Error" is displayed. Press
– 41 –
Owner's Manual
Set/Fix]
] and [ ] to change the
] and [ ] to switch to an item you want
Set/Fix]
]
Set/Fix].