Louver lock (Fixing the angle of the louvres)
You can set and fix the angle of louvres individually for each air outlet.
NOTE
• For models that "Louver setting" is not available, the message "No function" is displayed.
• Press [
Return] to not fix the changes, so conditions are as before changes, and return to the "Louver setting" screen.
• To cancel "Louver lock", press [
• When the operation mode is "Cool" or "Dry", performing "Louver lock" at position (4) or (5) may cause condensation.
• For group connections, refer to <When multiple indoor units are connected as a group (group connection)>. (Page 57)
• "
" is displayed when "Louver lock" is set.
1
2
3
4
5
6
] and [
] to set louvre not locked for the louvre angle of each louvre.
– 22 –
In "Menu" (Page 17), select "Louver
setting", and press [
Press [
] and [
] to select "Louver
lock", and then press [
Press [
] and [
] to select louvres
Louvre 3
Louvre 1
Louvre 2
For louvre numbers of each indoor unit, refer to
<Individual louver (Select wind direction for each air
outlet)>. (Page 20
)
Press [
] and [
] to select a louvre
angle (wind direction)
Press [
] to raise a louvre and press [
lower a louvre.
(1)
(2)
(3)
Press [
Set/Fix]
Return to the "Louver setting" screen.
Press [
Return]
" " is displayed.
When doing group connections, the screen for
selecting units is displayed, so press [
display " ".
Owner's Manual
Set/Fix]
Set/Fix]
All louvres
Louvre 4
] to
Louvre not
(5)
(4)
locked
Return] to
EN