Related Manuals for TEMPLE & WEBSTER SBKCNTOA
Summary of Contents for TEMPLE & WEBSTER SBKCNTOA
- Page 1 TEMPLE SBKCNTOA WEBSTER SBKCNTBK ASSEMBLY INSTRUCTIONS Oak Ski-Leg 140cm Console Table - White Oak Oak and Black Ski-Leg 140cm Console Table - White Oak / Black Leg Two people required www.templeandwebster.com.au...
- Page 2 Keep these instructions for future reference Assemble the furniture on a soft level surface to avoid damaging the furniture or your floor. Parts of the assembly will be easier with 2 people. We recommend furniture be assembled near where they will be placed, to avoid moving the product unnecessarily once assembled.
- Page 3 Tools Required Time Required DO NOT USE Mallet Flat Head Screwdriver 30 min Parts List People Required Table Top (P1); Leg Post (P2) x 2; Leg Post (P3) x 2; Stretcher (P4) x 2. (P1) (P3) (P2) (P2) (P3) (P4) (P4)
- Page 4 Hardware/Fittings M8 mm Long Threaded Rod Flat Washer 12 Spring Washer 12 Short Threaded Rod Barrel Nut...
- Page 5 2 x4 5 x2 10 x2 P2 x2 Insert 1 x Barrel Nut into Leg Post (P2). If necessary, use a flat head screwdriver to rotate the Barrel Nut. Screw 2 x Long Threaded Rod into Barrel Nut Screw 1 x Short Threaded Rod into Leg Post (P2).
- Page 6 1 x8 P4x2 Insert 4 x Wood Dowel n i to Stretcher (P4). If necessary, gently tap the wood dowels with a mallet. Repeat with the remaining Stretcher (P4). 3 x4 4 x4 7 x4 Place the Top (P1) with its underside facing up on a soft covered surface. Table Position 1 x Leg Post (P3) onto the corner of Top (P1) as shown.
- Page 7 3 x4 4 x4 7 x4 Fit Stretcher (P4) onto Leg Post (P3) as shown. Position Leg Post (P2) onto the other end of Stretcher (P4) and the corner of Top (P1) as Table shown. Loosely attach Leg Post (P2) to Table Top (P1) with 2 x Flat Washers 2 x Spring Washers...
- Page 8 3 x4 4 x4 6 x4 7 x4 8 x1 Attach Stretcher (P4) onto Leg Posts (P2) (P3) with 2 x half moon washers 2 x Flat Washers , 2 x Spring Washers and 2 x Nuts on each leg frame. Fasten with Spanner...
- Page 9 8 x1 9 x4 100% Fasten all Nuts with Spanner Paste 4 x Felt Feet onto Leg Posts (P2)&(P3) as shown. Please dispose of all With help, carefully turn the table over. packing thoughtfully. Assembly is complete.
Need help?
Do you have a question about the SBKCNTOA and is the answer not in the manual?
Questions and answers