Table of Contents
Advertisement
NOTE: The deck adjustment lever is divided into
three (3) parts, the adjustment handle and two
(2) lever pivot brackets. See Figure 4.30.
Lever Pivot
Brackets
Figure 4.30
4.
Remove the split bushing from the rear lift shaft.
See Figure 4.31.
Split bushing
Figure 4.31
5.
Work the shaft out of the frame.
6.
Repeat steps 4 and 5 on the front lift shaft.
7.
Reinstall the lift shaft and lift lever by following
the above steps in reverse order.
8.
Test run the mower before returning to service.
Adjustment handle
Lift shaft
CUTTING DECK AND LIFT SHAFT
20
Advertisement
Table of Contents
