Miele G500 Technical Information page 66

Technical Information
3.2.3.1 Dual-knob Controls
Two knobs are used to select programs:
1. Program Selector – refer to Figure 3-10.
The program selector is turned clockwise to the starting position of the
desired program. During the course of a program, the switch knob
progresses around the dial, serving as a program sequence indicator.
A dishwashing program is completed when the "End" position is
reached.
Note:
The "Cold" program is ended when the switch has reached a point
preceding the "Universal Plus" starting position.
Figure 3-10: Program Selector Options
66
G500 Dishwashers