Technical Information
2.3.4.2
Adjusting the Fascia Panel to Match Neighboring Drawers
By adjusting the setting of the nuts, refer to Figure 2-18 – Adjusting the
Fascia Panel, or by removing individual adapter strips, the width of the
adapter grill can be altered in keeping with adjacent units.
Figure 2-18: Adjusting the Fascia Panel to Match Neighboring Drawers
2.3.4.3
Front Panel
The door of a 60 cm wide base unit without a drawer panel, hinges and
fittings can be fitted to the front of an integrated dishwasher. For a Miele
kitchen, a front panel can be ordered with 2 pre-drilled fixing holes.
The position of two further fixing holes must be established on site. A
template is supplied to help locate fixing holes on non-Miele kitchens.
Figure 2-19: Front Panel
46
G500 Dishwashers