Table of Contents
Advertisement
(6) Restart SPEL CT when the file has been restored. Click the <OK> button in the
The system's configuration will be restored when SPEL CT is restarted.
Backing up/Restoring a Project
A backup of an added project can be made and restored. By using this backup/restore
feature, a SPEL CT application developed can be imported as a whole in another system
environment.
Backing up a Project
(1) Create a folder to save the backup file .
(2) Select the [Setup] - [Backup] - [All Projects] commands.
(3) Select the folder to save the backup file in. Click the <OK> button.
RC520 Rev.7
following message dialog.
file to be saved in is empty since a back-up file may overwrite the existing file in the
same folder.
If a backup file is to be saved on a floppy disk, be sure that the disk:
has been formatted;
is not write-protected;
is not a system disk.
Click the <New Folder> button when you make a new folder.
The status bar will indicate the project name and progress situation under backup.
Maintenance 2. Regular Maintenance Inspection
Also, be sure that the folder for the backup
131
Advertisement
Table of Contents
