Table of Contents
Advertisement
Tally lamp
The front tally lamp and the rear tally lamp can be illuminated during the shooting.
1
Select the [SYSTEM SETTINGS] menu → [LED & FAN] → [TALLY LED] → [FRONT]/[REAR]/[BOTH].
f The tally lamp will flash when the camera is in the following status.
‑ When the remaining capacity of the SD card or the remaining battery level is low (one time per second)
‑ The SD card has no more space to record (four times per second)
‑ When a warning such as a system error or a recording abnormality has occurred (four times per second)
@
NOTE
t The tally lamp will not illuminate or flash when the [SYSTEM SETTINGS] menu → [LED & FAN] → [TALLY LED] → [OFF] is set.
Chapter 3 Preparation — Tally lamp
– 59 –
Advertisement
Table of Contents
