f Align the mount reference points on the grip mounting section of the camera and the grip mounting section of the grip when inserting into the
camera.
2
Slowly turn the grip counter-clockwise until it clicks. (Fig. 2)
3
Connect the grip cable to the <REMOTE> terminal. (Fig. 3)
4
Fix the grip cable with the grip cable clamp. (Fig. 3)
NOTE
@
t If it does not mount correctly, perform the mounting from the beginning. Do not apply excessive force to the grip and the camera.
t Store the grip cable inside the grip cable clamp. If it is not stored, the cable may fly out to bottom when the angle of grip is changed, or it may get
caught when mounting a tripod.
t Try not to hold the whole camera only with the grip with the total mass of the whole camera has increased by attaching multiple accessories to the