ESKUTE Netuno Pro Quick Start Manual

Netuno Pro Electric Mountain Bike
When open the bike's carton box, take out E-bike and use tools to cut off the package strings.
1 Install the Handlebar
1.1 Use inner hexagon tool to loosen
the stem cover and dont tighten
all bolts immediately before
adjusting the handlebar in a
property angel and position.
2 Install Front Wheel
2.1 Take out the front fork protector
from the front fork( Please note :
Front fork protector is used to
prevent the forks from
beingdeformed during transport .
It belongs to the packing material .
You can just throwaway this
accessory ! )
2.3 Install the front wheel on the fork .
Make sure the fork is attached to
theaxle and make sure the disc is
placed in the middle of the brake .
1.2 Then tighten with tool.
2.2 Take out the quick release
from wheel and unscrew
the bolt from the
quickrelease.
2.4 Insert quick-release axle into
spring and tighten screw
Quick releasenut to be at the
same end as the brake.