75 Remove the shaving heads from the shaving
76 Place new shaving heads in the holder.
77 Place the retaining rings back onto the shaving
1
2
-
78 Insert the hinge of the shaving head holder into
Ordering accessories
head holder.
Discard the used shaving heads immediately to
avoid mixing them with the new shaving heads.
heads and turn them clockwise to reattach the
retaining rings.
Each retaining ring has two recesses that fit
exactly into the projections of the shaving head
holder. Turn the ring clockwise until your hear a
click to indicate that the ring is fixed.
the slot in the top of the shaving unit and close
the shaving unit.
To buy accessories or spare parts, visit www.
philips.com/parts-and-accessories or go to your
Philips dealer. You can also contact the Philips
Consumer Care Center in your country (see the
international warranty leaflet for contact details).
52
English