Attaching The Child Restraint To The Base; Removing The Child Restraint From The Base - Britax Willow S Canadian User Manual

Attaching the Child Restraint to the Base

1. Ensure that the base is securely installed.
NOTE: Ensure LUAS storage compartment
lid is secure over LUAS storage prior to
placing child restraint into the base.
2. Place the child restraint into the base
and press down until a click is heard.
3. Pull up on both sides of the child
restraint to verify attachment.
4. Adjust the carry handle to the upright
locked position (Position 1) for use in a
vehicle and check that the recline angle
is still correct. See page 53 for carry
handle information.

Removing the Child Restraint from the Base

Pull up and hold the lever on the back
1.
of the child restraint.
2. Lift the child restraint up from the base
using the carry handle.
27