Page 1
This model is part of a Product Safety Recall. Please contact our Product Safety Team on 1800 239 655 if you own one. imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/register Code No.
Page 2
features 1. Water Saving course Designed to address concerns on water consumption. Less water is used per wash, while continuing to deliver a clean and effective washing performance. It is certified from WELS (Water Efficiency Labelling and Standards) scheme in Australia. 2.
Page 3
It’s your responsibility to use common sense, caution, and care when installing, maintaining, and operating your washer. Samsung is not liable for damages resulting from improper use. IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS...
Page 4
safety information To reduce the risk of fire or explosion: CAUTION • Do not wash items that have been washed, soaked, or treated with gasoline, dry cleaning solvents, or other flammable or explosive substances. They give off vapors that could ignite or explode. Rinse by hand any material that has been exposed to cleaning solvent or other flammable liquids or solids before putting in your washer.
Page 5
Do not install the washer nearby electrical implements and do not place any candles or cigarettes on the washer. Do not go near the washer if it is flooded or under water, as there is a risk of electric shock. Unplug the washer and drain the water completely.
contents SETTING UP YOUR WASHER Description of part Checking before washing and caring for garments How to wash automatically depends on the laundry Control Panel Fuzzy program Quick program Super Clean program Water Saving program Keeping the tub clean Wool program Blanket program Delicate program Delay Start...
setting up your washer DESCRIPTION OF PART The User’s Manual is for common use. Make use of the User’s Manual depending upon your washing machine model. Be sure to keep the lid closed during washing and spinning. Front control panel Filter Water supply hose (Hot) Water supply hose...
setting up your washer CHECKING BEFORE WASHING AND CARING FOR GARMENTS Must follow the checkpoints in order to avoid machine problems or damages on garments. • If the below problems are caused by customer’s faults, separate service fee will be charged. Checkpoints Before Starting Washing Check if the clothes are bleaching or not.
Page 9
CARING FOR CLOTHES BEFORE WASHING Take out personal belongings from pockets. • Caution, Check the pockets! Hairpins and coins cause damages to clothes and washing machine. They make noise and problems to the machine. Must check the pocket. If pants zippers are open while washing, the spin basket may be damaged. The zipper should be closed and fixed with a string before washing.
setting up your washer HOW TO WASH AUTOMATICALLY DEPENDS ON THE LAUNDRY Before starting washing, check the following; • Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure to lay down the drain hose. Washing for the first time Before washing clothes for the first time, you must run a complete cycle without clothes.
CONTROL PANEL For more details, see control panel of your washing machine. Press to pause and restart programs. START/PAUSE To change the washing procedure during an operation, press this button to BUTTON stop the operation, and press it again to restart the washer after changing the washing procedure.
setting up your washer MIST SHOWER Press this button once to operate.The mist dissolves laundry detergents more effectively leaving behind less residue. BUTTON(OPTION) Press this button to finish the wash at a specified time. Turn your washer off DELAY START to cancel a previously delayed start time.
Keeping the tub clean When using the machine under humid conditions for an extended time, various bacteria from the air may stick to the tub and form black dirt (fungi), causing damage to the human body. To keep the tub clean and hygienic at all times, it is recommended reading “Clean Tub program ”...
setting up your washer Delay Start Use this to specify a time for the wash cycle to start, for example, when you need to go out and are unable to monitor the washer. 1. Press the Power button to turn the washer “On”. 2.
manual functions Possible to select the function for each program. (Example) For a simple washing as the little dirt program : Power Select the little dirt program Wash Start/Pause WASH ONLY Press the Power button. Press the Wash button. Press the Start/Pause button.
installation & maintenance The User’s Manual is for common use. Make use of the User’s Manual depending upon your washing machine model. ENVIRONMENT Leave some space Maintain at least 10cm between the washer and the wall. Place the washer on a sturdy flat surface. If the washer is placed on an uneven or weak surface, noise or vibration occurs.
Page 17
CONNECTING THE WATER SUPPLY HOSE 1. Remove the adaptor from the water supply hose. 2. First, using a “+” type screw driver, loosen the four screws on the adaptor. Next, take the adaptor and turn part(b) following the arrow for gap about 5 mm between them. 3.
installation & maintenance HOW TO CONNECT THE DRAIN HOSE In case of pump-drained washer Attach the drain hose to the rear of the washer. • Install the clamp on the drain hose and tighten to prevent leakage of water. Install the drain hose in the position of about 90~100cm •...
HOW TO ADD THE FABRIC SOFTENER Slide and open the cover in the direction of the arrow, insert the rinse detergent, and slide and close it in the reverse direction. • When a proper amount (one time does) of fabric softener is stored in the softener inlet,it is automatically put in at the last rinsing cycle.
installation & maintenance CLEAN THE PUMP FILTER 1. Place a rag or towel under the wash filter to avoid wetting the floor, and rotate the filter counterclockwise and pull it out. 2. Remove any dirt from the filter. 3. Return the filter to its place by rotating the filter clockwise until it locks into position. PRECAUTIONS WARNING! NOTE THE FOLLOWING PRECAUTIONS TO PREVENT ELECTRICITY LEAKAGE AND THE POSSIBILITY OF ELECTRIC SHOCK.
troubleshooting PROBLEM CHECK Washing machine won’t work - Is the water tap opened? - Is the washer plugged in? - Is the power cut off? - Is there enough water? Water dose not drain - Is the drain hose down?(No pump) - Is the drain hose frozen? - Is the drain hose clogged? - If the water dose not drain in 15 minutes, a...
washing machine won’t work? PROBLEM CHECK & SOLUTION The power is cut off. Is the electric voltage normal? Is the washer plugged in? Plug in the electric cord. Water does not drain. Is the drain hose down? Put the drain hose down. Is the drain hose folded? Unfold the drain hose.
Adjust the legs on the feet for leveling. Is around the washing machine filled with unnecessary stuffs? Remove those unnecessary things away from the wash machine. specification SW80SP MAX. MASS OF DRY SW80SP 8.0 kg MAXIMUM 80 l...
Page 24
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT AUSTRALIA 1300 362 603 www.samsung.com Code No. DC68-02817A-02_EN SW80SPW-02817A-02_EN.indd 24 2010-10-08 ¿ÀÈÄ 2:26:13...