Hitachi EC2-605 Instruction Manual page 15

If error is indicated during the starting process, refer to Attachment 3 Maintenance Console Error Code List.
(If Error10 is indicated as shown in the future, press any key to restart the process.)
Note 1)
(3) Console type indication
Indicates the type of the console in use. (EC4-605 for example)
Note 2)
(4) Elapsed time indication
Indicates the total length of hours the console has been used in terms of percentage
(%) to a maximum operation time available. When the reading reached 100, the
console operation will be disabled. Please request your maintenance company to run
a clearance work in advance. With the factory setting at shipment, the console will
reach 100% used level after about 500 hours in total of power-ON time.
Note 3)
(5) Console start mode indication
Indicates operation mode of the console at start.
CS1 START : Elevator Maintenance mode
CS2 START : Group/Door mode
CS3 START : UA-03/04 mode
(4) Turn the power OFF
Depress the console Power-OFF button
Note) In the case the power is automatically turned OFF
In the following cases, the power is automatically turned OFF to save on battery life:
● Longer than 10 minutes (initial value) have elapsed without operation.
● When error 03/error 05 occur (see Attachment 3).
● If self-diagnosis immediately after power-ON turns to be an error. (Failure)
(Indication for automatic power-OFF)
3. Connection Method. How to Turn the Power ON-OFF
OFF
to turn the console OFF.
15