Setting The Date - Rollei AFM 35 Operating Instructions Manual

SETTING THE DATE

Setting the date
(Year-Month-Day/Hour-Minute)
›
Your camera allows the date or the hour to be
imprinted in your pictures.
›
To set the date, switch the camera on, then hold the
SEL button down for at least two seconds until the
date display starts blinking.
›
To change the blinking digits, press the SET button.
If you hold the button down, the settings will change
rapidly.
›
The following settings are possible:
Year: '01 bis '40 (2001 bis 2040)
Month: 1 bis 12
Day: 1 bis 31
Hour: 0 bis 23
Minute: 00 bis 59
›
Renewed depression of the SEL button will put your
setting in memory, and the next digits will start
blinking.
›
After setting the minutes, press the SEL button until
none of the digits is blinking.
›
Year, month and day will change as a function of
hour and minute.
37