Husqvarna AUTOMOWER 430X Operator's Manual page 45

Message Cause
Electronic problem Temporary electronic or firmware rela-
ted issue in the product.
Loop sensor prob-
lem, front/rear
Charging system
problem
Tilt sensor prob-
lem
Temporary prob-
lem
Temporary battery
Temporary battery or firmware related
problem
issue in the product.
Battery problem
Charging current
Wrong or faulty power supply unit.
too high
Connectivity prob-
Potential problem on the connectivity
lem
circuit board in the product.
1201 - 001 - 05.06.2019
Action
Switch off/on the product.
If the problem remains, the message
requires action by an authorized serv-
ice technician.
Switch off/on the product.
If the problem remains, the message
requires action by an authorized serv-
ice technician.
Switch off/on the product.
If the problem remains, the message
requires action by an authorized serv-
ice technician.
Switch off/on the product.
If the problem remains, the message
requires action by an authorized serv-
ice technician.
Troubleshooting - 45