User Calibration On/Off; Response Settings - Raymarine ST60 Commissioning Manual

10

User calibration on/off

Press the track or reset button to toggle the User calibration either ON or
OFF as required.
Note: If at any time, you want to access the software version and serial num-
ber, you need to set User calibration ON.
To enter Dealer calibration, hold down
and
for approximately 12 seconds
Entry
screen
track
and
User cal
on/off
Self test entry
Dealer calibration

Response settings

The response values determine the sensitivity of the display to data changes.
You can set each response value from 1 to 15. A low number provides a
smooth response and a high number a much livelier response.
Use the
(decrement) and reset (increment) buttons to set the required value.
reset
Response
track
button to select the response you want to set, then use the track
ST60 Graphic Display Commissioning Guide
Battery voltage
reset
Default reset
D6479-1