Table of Contents
Advertisement
Available languages
Available languages
Installation (continued)
Installation
INSTALLING THE CHARCOAL FILTER
(SKIP THIS STEP IF YOU ARE USING EXTERIOR VENTING)
NOTE:
The charcoal filter should only be installed if you are not using an external venting system.
- Turn over the range hood (A) and place its top on a protective surface .
- Unhook the charcoal filter support (9) from the support hook (10) and pull the charcoal filter support up.
- Place the charcoal filter (B) under the charcoal filter support (9). Ensure that the filter is placed horizontally, or the charcoal filter
support (9) will not close properly.
- Slide the charcoal filter support (9) to the left or right in its braces (11) until you can re-hook it on its support hook (10).
B
10
A
Please contact customer.service@conglomkb.com or 1-877-333-0098 for further assistance .
9
B
10
11
9
11
11
CONGLOMKB .COM
- Quick Links:
- Replacing Lights
- Replacing Filters
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the QR045 and is the answer not in the manual?
Questions and answers
Hi! The light switch will turn the lights on, but at this time it will not turn the lights off. When I tap on the hood vigorously, the lights flicker. Also, if I flick the switch with a snap a few times, the lights might turn off. I'm wondering if there's a loose wire connected to the switch. Can the button panel be removed for servicing? Thanks!