Mounting - Mitsubishi Electric LX-005TD Instruction Manual

(7) In the case of low tension operation, minimize the mechanical loss to keep the tension control error to a
minimum.
(8) The tension detecting roller cannot be supported at one side.
(9) Install guide rollers before and after the tension detector so that material angles 1, 2 may not differ.
(10) When installing the roller, match the roller center and the center mark ( see outside dimensions ) of the
tension detector.

3.2 Mounting

Use bolts with strength of 10.9 or more specified in ISO 898-1 ( 1988 ).
(1) Detail of mounting of tension detector ( standard installing of LX-TD type ).
The pillow block fitting bolts should not be linger than the thickness "t" of the installing base of the detec-
tor side.
The pillow block, hexagon socket head bolts and others are to be prepared by the user.
Tension detecting roller
Guide roller
1
Pillow block
Guide roller
2
Pillow block fitting bolt
t
• LX-100TD, 200TD
• In other models
5
t = 18mm
t = 13mm