Page 1
Getting Your Multifunction Back On Your Network After A Router Or Network Change PIXMA MG3520 Mac OS...
Page 2
Getting Your Multifunction Back On Your Network After A Router Or Network Change PIXMA MG3520 Mac OS Preparing to Connect My Multifunction to My Network Network Requirements Notes on Wireless Connection Installing the Drivers & Software...
Page 3
Information << Previous Next >> Important If any of the following situations exist • You have replaced your Router or Access Point • You want to use a different wireless network • Router settings have been changed. Please complete the following steps to apply the new configuration settings to your multifunction.
Page 4
Preparing to Connect the Multifunction To the Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network.
Page 5
Preparing to Connect the Multifunction To the Network An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment.
Page 6
• Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider. • If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access...
Page 7
A step-by-step walk through of the wireless setup is built into the installation routine of the software for your PIXMA. To begin the reinstall of your PIXMA MG3520 to your wireless network, you must first download the software to your computer.
Page 8
Installing the Drivers & Software Click Next on the first screen. If prompted, enter the Administrative Password to continue.
Page 9
Installing the Drivers & Software Click Next on the following screen.
Page 10
Installing the Drivers & Software On the Connection Method Selection screen (1-1) select Wireless Connection, then select Connect to the network on the Printer Setup screen (2-1). 10 10...
Page 11
Installing the Drivers & Software Continue to follow on-screen instructions. Select Cableless setup on the Setup Procedure Selection screen (3-1). 11 11...
Page 12
Installing the Drivers & Software Carefully follow the instructions on the Connection via Cableless setup screen. (4-1). Click Next 12 12...
Page 13
Installing the Drivers & Software Carefully follow the instructions on the Connection via Cableless setup screen. (4-2). Click Next 13 13...
Page 14
Continue following on-screen instructions. On the Software Installation List, select *software to install and click Next. *MP Drivers and Canon IJ Network Tool are required and cannot be deselected. We recommend installing My Image Garden and Quick Menu to take full advantage of the printer’s features. It is not necessary to reinstall these additional programs if they were...
Completing the Setup Continue following on-screen instructions. When the Setup Complete screen appears, click Next. At this point, setup of the printer and network is complete. Continue to follow any remaining on-screen instructions to finish and exit the setup program. 18 18...