Toro Workman 07378 Installation Instructions

Four-Post Rollover Protection System Kit
Workman
Model No. 07378—Serial No. 290000001 and Up
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
No parts required
Left ROPS post
Right ROPS post
Crossbar
Floor support
Flange-head bolt (1/2 x 3-1/2 inches)
Flange-head bolt (3/8 x 2-1/2 inches)
Flange-head bolt (3/8 x 1 inch)
Flange-head bolt (1/2 x 1-1/4 inches)
Locknut (3/8 inch)
Locknut (1/2 inch)
Preparing the Machine
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Shut off the engine and remove the key.
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® HD/HDX/HDX-D Utility Vehicle
Qty.
–
1
1
1
2
4
4
4
2
8
6
Figure 1
Register at www.Toro.com.
Prepare the machine.
Install the four-post rollover protection system (ROPS).
Original Instructions (EN) All Rights Reserved *3438-470* A
Printed in the USA
Form No. 3438-470 Rev A
Installation Instructions
Use
g038494