Time; Date; Volume; Visibility Parameters - Miele PWM 511 Operating And Installation Instructions

Supervisor level

Time

Date

Volume

Visibility
parameters
"Machine off"
status
66
After selecting the clock format, you can set the time of day.
Clock format
- 24 h clock
- 12 h clock
- No clock
Set
- The time can be set.
The date can be set after selecting the date format.
Date format
- DD.MM.YYYY
- YYYY.MM.DD
- MM.DD.YYYY
Date
- The date can be set.
The volume for various sounds can be changed.
- Finish tone
- Keypad tone
- Welcome tone
It can be set to one of 7 different levels or switched off altogether.
- Fault alarm
The fault alarm can be activated or deactivated.
Various parameters, such as the temperature, spin speed, Extras
etc., are displayed when a programme is selected. You can decide
which parameters should not be displayed. The parameters cannot
be changed/are no longer displayed.
Factory default: all parameters are visible (marked in orange)
In order to save energy, the washing machine can be set to switch
to standby mode automatically after the end of the programme or if
no further selection is made. In the default setting, the machine will
not switch to standby mode automatically.
Changing this setting leads to increased energy consumption.
- No switch-off (factory default)
- Switch off after 15 minutes
- Switch off after 20 minutes
- Switch off after 30 minutes