Step 3. Handle bar assembly
• Route the two hand pulse wires (26) through the hole in the handle bar
mounting plate and out through the hole in the console plate. Install
the Handle Bar (3) onto the Console Mast (2) with two 5/16" x 5/8" Hex
Head bolts (51), two 5/16" Flat Washers (72) and two 5/16" Split
Washers (103) being careful not to pinch the hand pulse wires between
the handle bar and mounting plate, lastly align the cover, Handle Bar
(105).
105
3
26
155
157
26
72
2
103
51
100
49