Steps
1. Locate the notch on the 2280 solid-state drive.
2. Align the notch on the 2280 solid-state drive with the tab on the M.2 card slot.
3. Slide the 2230 solid-state drive into the M.2 card slot on the system board.
4. Replace the screw (M2x3) that secures the 2230 solid-state drive to the system board.
Next steps
1. Install the
HDD/ODD
2. Install the
side
cover.
3. Follow the procedure in
WLAN Card
Removing the WLAN card
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
ODD
bracket.
About this task
The following images indicate the location of the wireless card and provides a visual representation of the removal procedure.
38
Disassembly and reassembly
bracket.
After working inside your
Before working inside your
computer.
computer.