About this task
The following images indicate the location of the 3.5-inch hard drive and provides a visual representation of the installation
procedure:
Steps
1. Place the hard drive into the hard-drive bracket and align the tabs on the bracket with the slots on the hard drive.
2. Secure the two #6-32 screws securing the 3.5 in. hard drive to the bracket.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
HDD/ODD Bracket
Removing the HDD/ODD bracket
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
3.5 in.
HDD.
22
Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.