Table of Contents
Advertisement
Installation
^ Now attach the covers onto the
retaining clips on both sides.
In the case of side-by-side
installation, the cover strips are only
required on the outer sides.
^ Fit the cover to the light contact
switch so that it clicks into place as
shown.
68
All manuals and user guides at all-guides.com
Fitting the plinth facing
^ Trim the plinth facing to the required
^ Secure the plinth to the appliance,
^ Now fit the plinth facing.
Do not cover the vents in the plinth.
This will damage the appliance.
length and height (cut along the
lower edge of the plinth facing where
it touches the floor).
and attach the cover discs supplied.
Advertisement
Table of Contents
