Fitting A Continuous Furniture Plinth Panel - Miele K 31222 Ui Manual

Installing the appliance

The foam  ensures the airflow
is separated to prevent
malfunctioning of the appliance.
 Insert the piece of foam  supplied.
 Refit the plinth panel, but do not
secure it in position yet.
Without a continuous plinth panel:
 Pull the plinth panel  forwards until
the ventilation slats are in alignment
with adjacent cabinet plinth panels.
 Hold the plinth panel securely and
attach it to the right and left using the
bolts supplied .
With a continuous plinth panel:
 Push the plinth panel  right up
against the refrigerator and attach it
to the right and left using bolts .
10841790-04
Fitting a continuous furniture
plinth panel
Ventilation takes place through a
ventilation grille in the appliance
plinth.
The ventilation gaps must never be
obstructed.
If a continuous plinth panel is to be
fitted, a suitable ventilation gap will
need to be made in it for the
ventilation grille of the appliance:
 Trim the furniture plinth panel (U) to
the correct height.
 Adjust the height (V) along the niche
width (W) underneath the appliance
plinth .