Operation Procedure; Dry Clothes Operation - Sharp DW-208EX Operation Manual

Operation Procedure

Operation Procedure

Dry clothes operation

(Example of indication)
Power ON/
OFF button
Insert the plug into the power socket
1
(220V).
The current humidity will not be displayed accurately
for around one minute when the unit is plugged in.
This is because the humidity sensor is checking the
humidity.
If the "full tank indicator" blinks, empty the water tank
and reinstall the tank properly.
2
Press the Power ON/OFF button.
Operation indicator lights, and "STANDARD" operation
starts.
Press DRY CLOTHES SETTINGS
3
button and select operation
mode.
Operation mode is sequentially switched.
( 12)
Set the airflow direction of the louver.
4
Set the optimum direction of airflow based on the individual usage and purposes.
( 13)
When the drying clothes process is in operation, you cannot use "Fan speed/HIGH, ON/OFF" and "Fan
*
speed/LOW, ON/OFF" button.
Stop
Press the Power ON/OFF button again.
Operation indicator will be turned off and the operation stops.
The crystal monitor will continue to show the comfort levels,
temperature and humidity of the room even if operation stops.
If you press operation key again after the operation has stopped, the operation will start from the last operation
*
mode.
10
Operating state in STANDARD mode
ON / OFF
Lighting
2
FAST
STANDARD
DRY CLOTHES
SETTINGS
GENTLE
Humidity indicator blinks up and down.
STANDARD STANDARD
GENTLE GENTLE
FAST
FAST
Operation cannot be
started unless the water
tank is installed.
DRY CLOTHES
mode
DRY CLOTHES
SETTINGS but-
ton
3
Pip
FAST
STANDARD
Blinking
GENTLE
FAST
STANDARD
GENTLE
Select when you want to dry
clothes under normal situation.
When you want to dry lingerie
gently and quietly.
When you are in a hurry to dry
large quantities of clothes.
FAST
STANDARD
GENTLE