Plantronics Voyager 100 Series - Headphones Manual

Table of Contents

Contents

1 Pair
2 Fit
3 Charge
4 The basics
5 Support
6 Documents / Resources
- 6.1 Download manual

Pair

Get Paired

The first time you power on your headphones, the pairing process begins.

Slide the power switch on. You hear "pairing" and the LEDs flash red and blue.
Activate Bluetooth^® on your phone and set it to search for new devices.

iPhone Settings > Bluetooth > On*
Android Settings > Bluetooth: On > Scan for devices*

NOTE *Menus may vary by device.

Select "PLT V100 Series."
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear "pairing successful" and the LEDs stop flashing.

Pair second device

Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.

NFC pairing

Ensure NFC is on and your phone's display is unlocked.
Tap and hold the headphones to the phone's NFC tag location until NFC pairing completes. If necessary, accept the connection.
TIP Keep an eye on your Smartphone's screen for prompts to start and accept the pairing process.

Fit

For the best fit and sound quality, adjust the headband.

Lengthen or shorten the headband until the ear cushions fit comfortably over your ear.
Position the stabilizer T-pad above your ear.
Stretch and bend your headset for a perfect fit.
To wear the microphone on the other side, rotate the boom up and over.
Adjust the boom so it points to the corner of your mouth.

Charge

It takes up to 2 hours to fully charge your headphones. The LED turns off once charging is complete.

TIP To check the battery status, press the power button towards the Bluetooth button while wearing your headphones and not on a call.

The basics

Device overview

	Mute/unmute (during a call)
	Activate voice assistants such as Siri ® and Google Now ™ (while not on a call)
	Call button
	Redial
	Play/pause*
	Charge port
	Power button
	Bluetooth pair
	Volume up button
	Track forward*
	Volume down button
	Track backward*

NOTE *Functionality varies by application.

Power on/off

Slide the switch to power on or off.

Make/Take/End Calls

Answer or end a call
Tap the Call button.

Answer a second call
First, tap the Call button to end current call, then tap the Call button again to answer new call.

Redial last outgoing call
Double-tap the Call button.

Activate voice assistant
If your smartphone has a voice-enabled assistant, press and hold the Mute button for 2 seconds and wait for the phone prompt.