Plantronics BackBeat 903+ Bluetooth Headphones Manual

Also See for BackBeat 903+:

User manual (9 pages)

Specifications (2 pages)

Online user's manual (1 page)

Table of Contents

Contents

1 OVERVIEW OF THE DEVICE
2 CONNECT TO YOUR PHONE
3 ADJUST THE FIT
4 LISTEN TO THE VOICE
5 TIPS
6 SPECIFICATIONS
7 Documents / Resources
- 7.1 References
- 7.2 Download manual

Plantronics BackBeat 903+ Bluetooth Headphones Manual

OVERVIEW OF THE DEVICE

Overview of the device

CALL BUTTON

Take a call or end it (1 tap)
Redial (2 taps)
Initiate phone's voice-dialing (2-second press until tone is heard)
Reconnect lost Bluetooth connection (1 tap if the headphones don't automatically reconnect)
Cancel missed call LED (1 tap)
Reject a call (2-second press)
Transfer call to/from phone (during call, 2-second press)
Enable/disable Online Indicator (while powered on, 2-second press Call and Volume Up buttons)

MICRO USB CHARGING PORT

Use with the AC wall charger:
1 hour before first use 3 hours (100% charge)
Do not use headphones while charging

VOLUME/TRACKING BUTTONS

Volume Up/Down (1 tap per level change)
Track Forward/Back (2-second press per track change)
Enable/Disable OpenMic™ (3-second press Call and Volume Down buttons)

LED

Charging (solid red)
Fully charged (brief solid blue flash)
Low battery (2 red flashes every 15 minutes)
On a call (blue flash every 2 seconds)
Missed call (3 purple flashes repeating for 5 minutes or until cancelled)
Pairing mode (repeating red/blue flashes)

MUSIC BUTTON

Play/Pause (1 tap)
Bass Boost (2-second press)
Mute Music or Call (1 tap)
Use OpenMic™ to pause music and activate mic (1 tap)

POWER/PAIRING BUTTON

On/Off (2-second press to turn on, 4-second press to turn off)
Activate pairing mode after initial set up (press until red/blue LED flashes)
Check battery level (1 tap)

caution
Be safe!
Please read the safety guide before using your new headphones.

CONNECT TO YOUR PHONE

Pairing is a one-time process unless your phone loses the connection or you want to pair to a new phone.

READY
Activate the Bluetooth feature on your device, then get it to add / search for / discover new Bluetooth devices.

Phones have different menus to select from:
iPhone: Settings > General > Bluetooth > On (starts the search for devices)
BlackBerry® smartphone: Settings/options > Bluetooth: On > Search for devices
VIDEO TUTORIAL IN USA: www.plantronics.com/pairing

SET
First time, right out of the box:
With headphones turned off, activate Bluetooth pairing mode by pressing Power/Pairing button on. The LED flashes red/blue to indicate pairing mode.

Pairing new phone/reconnecting original:
With headphones turned off, press Power/Pairing button until the LED flashes red/blue.

CONNECT
Select "PLT_BB903+" from the list of Bluetooth devices shown on your device.
If device asks for a passcode, enter four zeros (0000). You may see **** on screen.

Some devices also ask to confirm connection after pairing. The headphone's LED will stop flashing red/blue once successfully paired/connected.
You can now make a call using your device's keypad or voicedialing feature.

ADJUST THE FIT

For the best sound performance and a secure, comfortable fit, be sure to adjust the headphones to rest gently in your ear and drape around the back of your neck.

Drape the stereo cable behind your neck.
Guide one earpiece behind your ear and secure the eartip inside your ear using the telescoping/swivel adjustments.
Repeat step 2 with the other earpiece and continue to adjust the fit in each ear until both eartips rest comfortably and securely in your ears.

LISTEN TO THE VOICE

These headphones whisper various status alerts when you power on/off, run low on listening time, or lose/ reconnect the Bluetooth connection to your phone.

WHAT YOU'LL HEAR	WHEN YOU'LL HEAR IT
Listening Time: (5 hrs, 4 hrs, 3 hrs, 2 hrs, 1 hr)	After 2-second press of the Power button to turn on power or after a short press during music play
Battery Low	When you have approximately 30 minutes left before the battery must be recharged
Recharge Battery	When you have approximately 10 minutes left before the battery must be recharged
Connected	After pressing the Power button to turn on power or to recon nect a dropped Bluetooth connection
Incoming Call	As an incoming call rings to your phone
Track Forward/Back	After 2-second press of either track forward + or track backward - button
Mute On	After tapping the Music button during a call
Mute Off	When on mute during a call, after tapping the Music button
Lost Connection	When the phone loses the Bluetooth connection with the headphones

TIPS

Make Calls With Voice Dialing:
Your headphones can work with your phone's voice dialing feature. Press the Call button for 2 seconds and listen for the low tone. Your phone may prompt you by saying something like "Name Please." Check your phone's documentation for details.

Hear What's Going On Around You:
Your headphones use the OpenMic^TM feature to pause the music when you want to hear your surroundings or have a quick chat with someone nearby. To use this feature, tap the Music button once, then tap it again when you are finished and want to resume music play.

To disable this feature, press the Call and Volume Down buttons for 3 seconds (you will hear a low-high-low set of tones). To re-enable it, press the Call and Volume Down buttons for 3 seconds (you will hear a high-low-high set of tones).

Check the Battery Level:
If you are on a call or listening to music and hear 3 high tones then you have under 10 minutes of listening time remaining.

At other times, you can check the battery level by tapping the Power button. The headphones will say how many hours of useage remain.

The LED also flashes red to show the battery level.
1 flash = more than 2/3 full
2 flashes = 1/3 - 2/3 full
3 flashes = less than 1/3 full

Stay Near Your Device: Bluetooth has a working "range" of up to 33 feet between the device and headphones before audio degrades and the connection is lost. For best audio reception, keep your device on the left side of your body.

Know How to Reconnect: Your headphones try to reconnect a lost Bluetooth connection. If they can't, then tap the Call button once or manually reconnect via the device's Bluetooth menu.

SPECIFICATIONS

Talk/Listening Time	Up to 7 hours
Standby Time	Up to 7 days
Operating Distance (Range)	Up to 33 feet from device
Headphones Weight	34 grams
Headphones Dimensions	L x W x H = 330 mm x 20 mm (at widest point of earpiece) x 57 mm
Charge Connector	Micro USB charging
Battery Type	Rechargeable, non-replaceable Lithium ion polymer
Charge Time (Maximum)	3 hours
Power Requirements	5V DC – 180 mA
Bluetooth Version	2.1 + Enhanced Data Rate (EDR) and eSCO data packet transfer
Bluetooth Profiles	Supports Advanced Audio Distribution (A2DP), Audio/ Video Remote Control (AVRCP), Hands-free (HFP) v1.5 and Headset (HSP) v1.1
Operating, Storage and Charging Temperature	32°F - 104°F (0°C - 40°C)

NEED MORE HELP?
Phone support in USA:
1-866-363-BLUE (2583)
1-year limited warranty details:
www.plantronics.com/warranty

© 2011 Plantronics, Inc.
All Rights Reserved.
Plantronics, BackBeat and OpenMic are trademarks or registered trademarks of Plantronics, Inc.
Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license.
iPhone is a trademark of Apple, Inc., registered in the U.S. and other countries.
Blackberry is the property of Research In Motion Limited and is registered and/or used in the U.S. and countries around the world.
All other trademarks are the property of their respective owners.
Patents US D619561; China ZL200930192537.2; EM 001142582-002; Taiwan D135150; Patents Pending AM84445-01 (03/11)