Table of Contents
Advertisement
Installation
STEP 2 Flooring
STEP 3 Adjust the levelling legs
CAUTION
• The wine cellar must be levelled on a flat, solid floor. Failing to do so can cause damage
to the wine cellar or physical injury.
• Levelling must be performed with an empty wine cellar. Make sure no food items
remain inside the wine cellar.
• For safety reasons, adjust the front side a little higher than the rear side.
The wine cellar can be levelled using the front legs that have a special screw (leveller) for
levelling purposes. Use a flat-head screwdriver for levelling.
28
English
Untitled-8 28
• The surface to install the wine cellar
must support a fully loaded wine cellar.
• To protect the floor, put a large piece
of cardboard on each foot of the wine
cellar.
• Once the wine cellar is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use thick paper or cloth such as
an old carpet along the movement path.
To adjust the height of the left side:
Insert a flat-head screwdriver into the
leveller of the front left leg. Turn the
leveller clockwise to raise, or turn it
anticlockwise to lower.
2022-10-20
4:22:09
Advertisement
Table of Contents
