Quantum Scalar i500 User Manual page 143

Scalar i500 User's Guide
If you have AutoClean enabled, you can also import cleaning cartridges
into the library. For information, see
page 138. In addition, you can bulkload cartridges into the library rather
than use the I/E station to import media. For information, see
Bulkloading on page 129.
You must have access to the library's I/E station and the operator panel
to import cartridges.
Some host applications may fail import/export operations
Note:
when the I/E station contains cartridges that are assigned to
another partition. Move cartridges from the I/E station as soon
as possible to avoid possible conflicts with the other partitions.
The process for importing cartridges includes the following steps:
1 Go to the front of the library and insert cartridges into the I/E station.
2 Close the I/E station door.
The screen appears on the operator panel if the
Assign IE
Cartridge Assignment
screen (
Settings Tools > System Settings)
If the screen appears, do the following:
Assign IE
a Assign the cartridges to the appropriate partition by selecting a
partition listed on the
partitions to which you have been given access.
The partition button turns red after it has been selected.
If you select the wrong partition, open the I/E station
Caution:
door. Move the cartridge to a different I/E station slot
and close the I/E station door. The library will rescan
the I/E station, and the
again.
Select .
b
Apply
If the selected partition is online, it will be taken offline before the
c
import operation is performed, and brought back online after the
operation is complete. If the library contains multiple partitions,
the import operation will not affect operations in other partitions.
Chapter 4 Running Your Library
Performing Media Operations
Importing Cleaning Media
setting is enabled on the operator panel
.
screen. The screen lists only the
Assign IE
Assign IE
on
Manual
System
screen will appear
128