Manual Operations
This display panel on the indoor unit can be used to operate the unit in case the remote control has been
misplaced, or is out of batteries.
•
MANUAL Button: This button selects the mode in the following order: AUTO, FORCED COOL, OFF.
FORCED COOL Mode: In FORCED COOL mode, the Operation Light flashes. The system will then
•
turn to AUTO, after it has cooled with a high wind speed for 30 minutes. The remote control will be
disabled during this operation.
OFF Mode: When the panel is turned OFF, the unit turns off, and the remote control is re-enabled.
•
Infrared Receiver
Operation Indicator
Timer Indicator
Fig. 3.1
LED Display
Fig. 3.2
Manual Button
Alarm Indicator
PRE-DEF
(pre-heating/defrost)
Indicator
3
Page 7