9.2. Troubleshooting ..........47 3.3.5. Operating range of the remote control ...........25 10. Technical Specifications ..........48 Connecting External Equipment ......26 Warranty policy for Philips Professional Display 4.1. Connecting External Equipment Solutions .................50 (Multimedia Player) .........26 Index ..................52 4.1.1. Using HDMI video input ....26 4.2.
When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. •...
Page 4
65BDL6005X • Environmental absolute ratings Item Min. Max. Unit Storage temperature °C Operation temperature °C Glass Surface temperature °C (Operation) Storage humidity % RH Operating humidity % RH • LCD panel temperature need to be 25 degrees Celsius at all time for better luminance performance.
Page 5
65BDL6005X Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off.
Page 6
65BDL6005X TPV USA Corp 6525 Carnegie Blvd #200 Charlotte, NC 28211 Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source.
Page 7
65BDL6005X Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:+ 1. Remove fuse cover and fuse.
Page 9
Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
Page 10
For more information about E -waste please visit http://www.india.philips.com/about/sustainability/recycling/index.page and to know where you can drop off your waste equipment for recycling in India please contact on below given contact details.
Page 11
65BDL6005X Batteries For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation.
65BDL6005X Unpacking and Installation 2.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • As this product is high and heavy, the operation of moving the device is recommended to be performed by two technicians.
Page 13
65BDL6005X • Please keep the display in a vertical position when moving it. • Place the display vertically and its weight should spread evenly on the surface. • Avoid bending and torsion during transportation.
65BDL6005X 2.2. Unpacking Inspection Instructions • Read the inspection instructions before opening the packaging. (The inspection instructions are printed on the top of the box). • Ensure the product is in good condition prior to the removal of sealing labels, or the warranty will be void.
Page 15
65BDL6005X 5. Connect the power cord to the back of the display. Plug the other end of the power cord into an electric outlet to power on the display. Sealing Labels Sealing Labels AC Inlet <<Back Side>> Cau�on 1. Follow the inspec�on instruc�ons printed on the box.
Page 16
65BDL6005X 8. Install the wall mount kit. Wall mount kit <<Back Side>> Cau�on 1. Follow the inspec�on instruc�ons printed on the box. 2. Ensure the product is in good condi�on prior to the removal of sealing labels, or the warranty may be void.
65BDL6005X 2.3. Package Contents Please verify that you received the following items with your package content: • LCD display • Remote control with AAA batteries • Quick start guide • Power cord • Display Port Cable Remote Control Quick start guide •...
65BDL6005X 2.5. Mounting on a Wall To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you use a mounting interface that complies with TUV-GS and /or UL1678 standard in North America.
Mounting in Portrait Orientation This display can be installed in portrait orientation. Rotate the display 90 degrees counterclockwise based on the back view. The “PHILIPS” LOGO should be on the LEFT side when facing the backside of the display. 90°...
65BDL6005X 2.7. Operating Instructions of Edge Alignment Kit 2.7.1. Installing the Edge Alignment Kit • Before installing the edge alignment kit, the display must be mounted to the frame of video wall correctly. • We recommend you contact a professional technician when installing the edge alignment kit. We are not responsible for any damage to the product if the installation is not performed by a professional technician.
65BDL6005X 2.8. Using the Edge Finishing Kit (Optional) You could use the edge finishing kit to protect the display and have a better appearance. EFK6561/00 EFK6561/00 EFK6531/00 EFK6531/00 (Edge Finishing Kit (Edge Finishing Kit (Edge Finishing Kit (Edge Finishing Kit...
65BDL6005X 2.9. Using the gap pad 4. Apply another gap pad on the side surface and repeat the same process as step 3. Use the gap pad to ensure appropriate space between cascaded displays during video wall installation. 1. Remove the release sheet from the gap pad.
65BDL6005X Parts and Functions 3.1. Control Panel [ ] button [MENU] button Press this button to turn the display On or turn the display Return to the previous menu while the OSD menu is On. to standby mode. This button can also be used to activate the OSD menu when the OSD menu is Off.
65BDL6005X 3.2. Input/Output Terminals EXT. SPK TERMINAL SPEAKER SWITCH DP OUT Service Port AUDIO OUT 100-240V IR IN 50/60Hz 2.5A DVI IN HDMI 1 IN HDMI 2 IN VGA IN DP IN PC LINE IN Control IN Control OUT RJ45 IN...
65BDL6005X 3.3. Remote Control ] LIST button Reserved. 3.3.1. General functions ] INFO button Display information about current activity [ ][ ][ ][ ]NAVIGATION buttons Navigate through menus and choose items.. ] button Confirm an entry or selection. ] BACK button Return to the previous menu page or exit from the previous function.
65BDL6005X 3.3.2. ID Remote Control Press [ID] button. The red LED blinks twice. 1. Press [ID SET] button for more than 1 second to enter the Set remote control ID number when using several displays. ID Mode. The red LED lights up.
65BDL6005X 3.3.3. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Insert batteries with the correct polarity (+) and (-).
65BDL6005X Connecting External Equipment 4.1. Connecting External Equipment (Multimedia Player) 4.1.1. Using HDMI video input HDMI 1 IN HDMI 2 IN AUDIO OUT Multimedia Player [HDMI IN] HDMI Out 4.2. Connecting a PC 4.2.1. Using VGA input VGA IN DP IN...
65BDL6005X 4.2.3. Using HDMI input HDMI 1 IN HDMI 2 IN HDMI Out [HDMI IN] 4.2.4. Using DisplayPort input DisplayPort Out [DisplayPort IN] DP IN 4.3. Connecting Audio Equipment 4.3.1. Connecting an external audio device Audio In [AUDIO OUT] AUDIO OUT...
65BDL6005X 4.4. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a menu board. 4.4.1. Display control connection Connect laptop [RJ45] to [RJ45 IN] of DISPLAY 1, connect the [RJ45 OUT] connector of DISPLAY 1 to the [RJ45 IN] connector of DISPLAY 2.
Page 31
65BDL6005X Connect laptop [DVI] to [DVI IN] of DISPLAY 1, connect the [DP OUT] connector of DISPLAY 1 to the [DP IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 [DVI] [DVI IN] [DP OUT] [DP IN] Connect laptop [HDMI] to [HDMI IN] of DISPLAY 1, connect the [DP OUT] connector of DISPLAY 1 to the [DP IN] connector of DISPLAY 2.
65BDL6005X 4.5. IR connection External IR Receiver DISPLAY 1 DISPLAY 2 [Control IN] [IR IN] [Control OUT] NOTE: 1. The remote control sensor of this display will stop working if the [IR IN] is connected. 2. IR loop through connection can support up to 9 displays.
65BDL6005X Operation • When there is no OSD menu on the screen, press [ ] to display the menu of {Audio source}. NOTE: The control button described in this section is mainly on the remote control unless specified otherwise. 6.1.2. Navigating the OSD menu using the display’s control buttons...
Page 34
65BDL6005X Sharpness Or, you can adjust the color tones per 100K in the range of 3000K to 10000K. This function is digitally capable to keep crisp image at any timings. {Picture} - {Color temperature} - {User} setting to [User 2]...
65BDL6005X 6.2.2. Screen menu This mode displays the image pixel- by-pixel on screen without scaling the Picture H position original image size. Screen V position 16:9 Audio Clock Clock phase The picture is reproduced in 16:9 format and a black band at the top...
65BDL6005X 6.2.3. Audio menu Sync. Volume Enable/disable audio out (line out) volume adjustability to sync with internal speakers volume, but PD Internal speaker Picture Balance sound will be forced to be mute. Treble Screen Audio source Audio Bass Select the audio input source.
65BDL6005X PIP position 6.2.5. Configuration1 menu Select the position of the sub picture in the PIP (Picture-in- Picture) mode. Picture Switch on state Last status Choose from: {Bottom-Right}/{Bottom-Left}/{Top-Right}/ Screen Panel saving Action {Top-Left}/{Center}/{Custom}. Audio RS232 routing RS232/LAN PIP change Boot on source Action Exchange Main and PIP / PBP / Quick swap input signal.
Configuration 1 Logo Choose from : {Off} / { On} Configuration 2 Monitor ID Action Light sensor (require Philips accessory CRD41 External Sensor Box) Advanced Option Heat status Action Choose to turn on or off backlight adjustment according to Monitor information Action environment brightness.
Page 39
65BDL6005X Monitor ID Monitor information Set the ID number for controlling the display via the RS232 Shows information about your display, including model connection. Each display must have a unique ID number number, serial number, operating hours and software version.
65BDL6005X 6.2.7. Advanced option menu • {Secondary} - Designate this display as the secondary display. This display can not be operated by the remote control, and will only receive the control signal from the Picture Input resolution Auto primary display via the RS232 connection.
Page 41
65BDL6005X Example: 5 x 5 screen matrix (25 displays) • {Enable} - Choose to enable or disable the Tiling function. If enabled, the display will apply the settings in {H H monitors = 5 displays monitors}, {V monitors}, {Position}, and {Frame comp.}.
Page 42
65BDL6005X selectable) then the real time clock should be adjusted at the Select or leave an empty “__” for both the hour and moment in time set in the daylight saving on and off date. At minute slot if you do not want to use this power-on or daylight start date the clock should be put forward 1 hour at power-off schedule.
Page 43
65BDL6005X * OPS model only Power Save Advanced option reset Power save modes Reset all settings except {Date and Time} in the Advanced Mode 1: [TCP off, WOL on, auto off] option menu to factory preset values. DC off -> Power off. LED: Red.
However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- &...
Pixel Defect Tolerances In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub-pixel defects exceeding the tolerances listed in the following table.
65BDL6005X HOW TO AVOID MURA Although we can not guarantee the complete eradication of Mura every time, in general the appearance of Mura can be minimized by these methods: • Lower the backlight brightness • Use a screen saver •...
65BDL6005X 9.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of 2. Make sure the power switch is the display is not switched on.
65BDL6005X 10. Technical Specifications Display: Item Specifications Screen Size (Active Area) 64.5” (163.9 cm) LCD Aspect Ratio 16:9 Number of pixels 3840 (H) x 2160 (V) Pixel pitch 0.372 (H) x 0.372 (V) [mm] Displayable colors 16.7M (8bits-true) Brightness (typical)
Page 51
65BDL6005X General: Item Specifications Power Supply AC 100 - 240V, 50/60Hz Power Consumption (Max) 400 W Power Consumption (Typ.) 210 W Power Consumption (Standby & Off) <0.5W Dimensions [W x H x D] 1432.6 x 807.6 x 91.7 mm Weight 29.2 Kg...
LIMITED WARRANTY In the unlikely event the product requires service, we will arrange for your Philips product to be serviced free-of-charge within the warranty period, provided that the product was used in accordance with the user manual (e.g. in the intended environment).
Page 53
Warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow their warranty statement. Standard warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow the local warranty statement.
Index Warranty policy for Philips Professional Display Solutions Cleaning and Troubleshooting 46 Connecting a PC 26 Connecting Audio Equipment 27 Connecting External Equipment 26 Connecting External Equipment (DVD/VCR/VCD) 26 Connecting Multiple Displays in a Daisy-chain Configuration 28 Control Panel 21...
Page 55
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.