Jabra Connect 4s - Bluetooth Speakerphone Manual

Welcome

JABRA CONNECT 4S FEATURES

• Answer, end, reject and mute calls.
• Connect to computer via USB or Jabra Link 370.
• Connect wirelessly to mobile device via Bluetooth.
• Portable design.
• Omni-directional microphone.
• Wideband audio for exceptional sound quality.
• LED, audio indicators and voice guidance. ƒ
• Up to 15 hours talk time.
• Interact with your voice assistant (phone dependent) or speed dial with the one-touch Smart button* (must be enabled in Jabra Direct).

Speaker overview

Turn on the jabra Connect 4s

• Plug the Jabra Connect 4s USB cable into any available USB port on your computer, or
• Press and hold (2 secs) the On/Off button to turn the Jabra Connect 4s on or off.

Charging the Jabra Connect 4s

Plug the Jabra Connect 4s USB cable into any available USB port on your computer to charge the battery. The battery light is red when charging, and green for 1 minute when fully charged.

Connecting

1. Plug the Jabra Connect 4s USB cable into any available USB port on your computer.
2. Select the Jabra Connect 4s as the default audio device in Windows Control Panel sound settings, and in your softphone audio settings.

Connect to mobile device (Bluetooth)

1. Press and hold (2 secs) the Bluetooth button on the Jabra Connect 4s until the Bluetooth light flashes blue. Release the button when you hear the connection instructions.
2. Enable Bluetooth on your mobile device, and select the Jabra Connect 4s from the list of available Bluetooth devices. If prompted for a password enter 0000.

Connect to Bluetooth headset

For privacy, a bluetooth headset can be connected to the Jabra Connect 4s.

1. Plug the Jabra Connect 4s into any available USB port on your computer.
2. Put the Bluetooth headset into pairing mode (refer to your headset manual for instructions).
3. Press and hold (8 secs) the Bluetooth button on the Jabra Connect 4s until the Bluetooth light flashes blue and then flashes green. Release the button when you hear 'Connect to headset'.
4. The connection is established when the light turns solid blue.

How to use the Jabra Connect 4s

	On/Off	Press and hold (2 secs) the On/Off button until the lights flash
	Answer call	Tap the Answer call button
	End call	Tap the End/reject call button
	Reject call	Tap the End/reject call button
	Speaker volume	Tap the Volume up or Volume down button
	Battery status	Tap the Battery status button to display the current battery level
	Connect with new Bluetooth device	Press and hold (2 secs) the Bluetooth button to connect with a new Bluetooth device
	Reconnect/ disconnect with Bluetooth device	Tap the Bluetooth button to reconnect/disconnect with a Bluetooth device
	Mute microphone	Tap the Mute microphone button
	Voice assistant (off by default, Smartphone dependent)	Press the Smart button (use Jabra Direct to enable voice assistants, e.g. Siri, Google Assistant, Cortana)
	Speed dial (off by default, computer or Smartphone dependent)	Press the Smart button (use Jabra Direct to enable speed dial)

Multiple call handling

The Jabra Connect 4s can accept and handle multiple calls simultaneously.

	Put current call on hold and answer incoming call	Tap the Answer call button
	Switch between held call and active call	Tap the Answer call button
	Reject incoming call	Tap the End/reject call button

Switch between bluetooth devices

1. Press and hold the Bluetooth button and tap the Volume up or Volume down button to cycle between the connected devices. The connected devices will be announced.
2. Release the Bluetooth button when the correct device is announced. The Jabra Connect 4s will establish a connection with the device(s). When a connection has been established the device(s) will be announced.

Voice guidance on/off

To turn voice guidance on/off, press and hold (8 secs) the Mute button until you hear 'Voice guidance off' or 'Voice guidance on'.
NOTE: Not all voice prompts will be disabled when voice guidance is turned off.

Smart button

The Smart button is off by default.
To use the Smart button to activate your smartphone's voice assistant (e.g. Siri, Google Assistant, Cortana) or to speed dial a phone number on your smartphone or computer, install Jabra Direct on your computer and enable the Smart button in the Connect 4s settings.

Software

Jabra direct

Jabra Direct is software designed to support, manage and enable optimal functionality for Jabra devices. It is highly recommended to download and install Jabra Direct.
Download the latest version - jabra.com/direct

Update Jabra Connect 4s firmware

Firmware updates improve performance or add new functionality to Jabra devices.
To update firmware:

1. Connect to a computer via USB.
2. Download and install Jabra Direct.
3. Check for the latest firmware via Jabra Direct. You will receive notifications whenever there is an update for your device.

Support

FAQ

View the FAQs on Jabra.com/connect4s.

How to care for your Jabra Connect 4s

ƒAlways store the Jabra Connect 4s with the power off and safely protected.
ƒAvoid storage at extreme temperatures (above 70°C/158°F or below -20°C/-4°F). This can shorten battery life and may affect operation. High temperatures may also degrade performance.
ƒDo not expose the Jabra Connect 4s to rain or other liquids.

jabra.com/connect4s