YoU Thank you for purchasing the Jabra DrIVE Bluetooth® in-car speakerphone . We hope you enjoy it! This instruction manual will get you started and ready to make the most of your in-car speakerphone . ABoUt YoUR JABRA DRIVe...
- a2DP (advanced audio Distribution Profile) for transmitting music, podcasts and directions from a GPS app on your phone - Jabra Status Light (battery status, call status, connection status) - Size: H104 mm W56 mm D18 mm - Weight 100 grams...
The status light is flashing red There is less than 30 min . talk time left The status light turns red The unit is charging The status light turns green Fully charged or the charging level is between 70% and fully charged Jabra DrIVE...
Make sure that your speakerphone is fully charged for two hours before you start using it . Use the USb cable to connect Jabra DrIVE to the car charger . Plug the car charger into your car’s power outlet . The status light will light up red while charging .
Please check the manual for your mobile phone . 2 Put the speakerphone in pairing mode When you turn on your Jabra DrIVE for the first time, the speakerphone will automatically start up in pairing mode – i .e .
4 Your phone will find the Jabra DRIVE Your phone will find the speakerphone under the name “Jabra DrIVE” . Your phone then asks if you want to pair with the Jabra DrIVE . accept by pressing ‘Yes’ or ‘OK’ on the phone and/or confirm with the passkey or PIN = 0000 (4 zeros) .
The Jabra DrIVE sits discreetly and conveniently on the sun visor using the integrated metal clip . The product can be easily taken on and off the sun visor . For optimal sound quality place the Jabra DRIVE right in front of you and speak directly into the speakerphone.
Tap volume + or volume- to adjust the volume level . a short sound will indicate when the volume level is at its highest or lowest limit Jabra DrIVE * Phone dependent...
Hold active call Press the answer/end button Transfer an active call from Tap the answer/end button or your phone to Jabra DrIVE press it for a long time Three way call (Another incoming call) release active-accept Tap the answer/end button...
The speakerphone registers a list of up to 7 mobile phones . To remove the list: 1) Put your Jabra DrIVE in the pairing mode by long press on the answer/end button; 2) The press Volume down button while holding your finger on the answer/end button .
. Please consult your device manual for details . Please note that some features can only be operated from the primary device e .g . voice dial using Jabra DrIVE with 2 mobile phones . neeD MoRe HeLP? 1.
– including direct sunlight – or below -10°C/14°F) . This can shorten battery life and may affect operation . High temperatures may also degrade performance . - Do not expose the Jabra DrIVE to rain or other liquids . Jabra DrIVE...
. 4. Passkey or PIN is a code that you enter on your mobile phone to pair it with your Jabra DrIVE . This makes your phone and the Jabra DrIVE recognize each other and automatically work together . The passkey for all Jabra products is 0000 .
Need help?
Do you have a question about the DRIVE and is the answer not in the manual?
Questions and answers