Specifications; Power Supply Specifications; Lan Specifications - National Instruments RMX-410 Series User Manual

2.1 Power Supply Specifications

When using the LAN, the power supply ratings and accuracies are the same as for the digital
remote programming using RS-232 or RS-485. Refer to the RMX-410x Power Supply User Manual
for the specifications.

2.2 LAN Specifications

ELECTRICAL
Ethernet
Auto-MDIX
Auto-Negotiate
NETWORK CONFIGURATION
MAC Address
IP Address
DHCP
Auto-IP
Static IP
Hostname
Duplicate IP Detection
Subnet Mask
Default Gateway
DNS Server
LAN Reset
LAN PROTOCOLS
TCP
IPv4
Instrument Protocols
VXI-11
VISA
TCP Sockets
UDP Sockets
VXI-11 Discovery
SNMP Ping Server
HTTP
COMMANDS
SCPI
IEEE-488.2

2 SPECIFICATIONS

Meets IEEE 802.3u specifications
Accepts patch or cross-over cable connection
Selects fastest of 10Base-T or 100Base-T networks
(10 or 100 Megabits per second)
NI assigned: 00:19:f9:xx:xx:xx
View or set from front panel
Get address from network server. Leasing services
Create own IP address: 169.254.xxx.xxx
Any IP fixed by operator
NetBIOS protocols. Operator settable name
Reject duplicate setting or disconnect from network
Mask set by DHCP or static
Address set by DHCP or static
Address set by DHCP
Reset configuration from front panel or SCPI command
LAN packets follow Transmission Control Protocol
Internet Protocol version 4
Supports Core channel, not Abort or Interrupt channels
VXI-11 compliant, uses RPC and Portmapper, SCPI commands
Send SCPI commands to port 8003
Send SCPI commands to port 8005
Find connected instruments
Verify LAN connection to instrument
Web page server with Java scripts and applets
SCPI 1999 compliant command, measure and status
Condition and event register tree
5
NATIONAL
INSTRUMENTS