Polaris RZR XP 1000 EPS Owner's Manual page 108

MAINTENANCE
Filter Systems
Intake Pre-Filters
The engine intake pre-filter is located on the right side of the vehicle.
The clutch air intake is located on the left side of the vehicle.
Inspect the engine pre-filter before each use of the vehicle to ensure
adequate air flow. If necessary, remove the pre-filter and clean with
soapy water. Dry with low pressure compressed air.
Periodically inspect the clutch (PVT) air intake for debris and clean as
needed to ensure adequate air flow.
Tip: When washing the vehicle, always avoid spraying water directly toward the
PVT intake duct. See page 124 for recommended washing procedures.
Engine Intake
PVT Intake
Pre-Filter
Pre-Filter
106