Advertisement
2. INTRODUCTION
The coolant system stepped adaptor, enables thorough flushing of debris and contaminants from the cooling system during
repair and maintenance. Wide nozzle adaptor uses air and water to form a powerful jet washer, which cleans or dries (air only).
Air and water controls using a trigger for adjusting air pressure, and a lever for adjusting the water flow. Durable hard-wearing
Acetal plastic. Can be used in many other applications when a water system requires cleaning or unblocking. Standard garden
hose connector with swivel feature. Operating pressure: 87-145 psi/6-10 bar.
3. SPECIFICATION
MODEL NO: ....................................................... VS0050
Air Inlet size: ...................................................... 1/4 BSP
Adaptor size(s): ...............Ø21, Ø31, Ø34, Ø39, Ø42mm
Operating pressure: .......................... 87-145psi/6-10 bar
Water inlet size: ........................................................ 3/4"
4. ASSEMBLY
WARNING! Ensure that you read, fully understand, and apply the safety instructions before use.
‰
4.1.
LANCE CONNECTION
4.1.1.
Both lances connect to the hand unit via a bayonet type quarter-turn connector (fig.1).
4.2.
SUPPLY HOSE CONNECTIONS
4.2.1.
The supply hose for the water connects at fig.1.5 which is a quick fit connector.
4.2.2.
The air connection point is connected to the rear of the air flow trigger fig.1.6.
3
fig.1
5. OPERATION
5.1.
PRIMARY CHECKS
5.1.1.
Ensure that the water and air supply hoses and gun are correctly connected, and that air can circulate around without water or air
leaking.
5.2.
OPERATING THE UNIT
5.2.1.
Hold the spray gun firmly to counteract the recoil caused by the high pressure jet of the water. Before operating, ensure that the
lance is not directed at people, objects or animals prior to being directed at the object to be cleaned.
5.2.2.
To start spraying turn on water supply and adjust water flow (fig.1.1) turn on air supply and depress the trigger (fig.1.2) gently this will
release air to the water causing a pressurised jet. Both water and air can then be adjusted in accordance with the job at hand.
5.2.3.
WHEN WASHING IS COMPLETED
5.2.4.
Release residual pressure by turning off the air supply and water tap before disconnecting hose,
5.2.5.
Discharge any residual pressure in the unit by pressing the trigger until no more air or water comes out of the nozzle.
WARNING! Failure to discharge pressure could result in personal injury.
‰
5.2.6.
Wipe the jet wash gun clean and dry.
5.2.7.
Store in a clean, safe, dry, frost free and childproof location.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved
containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 24 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
1
6
4
2
5
sales@sealey.co.uk
Original Language Version
1
Water adjustment control
2
Air flow control trigger
3
Nozzle attachment (can interchange two different nozzles
4
Water hose thread with built in swivel
5
Water coupling attachment
6
Threaded connection point for airline
VS0050
REGISTER YOUR
PURCHASE HERE
www.sealey.co.uk
Issue 3
30/05/23
Advertisement
