Led Patterns - Yamaha Revolabs Executive Elite 03-ELITEEXEC8-AU Installation And Operation Manual

LED patterns

The following table shows activities associated with the various states shown
by microphone or adapter mute LEDs.
Equipment Use
Microphone in
Charger Base
Microphone not in
Charger Base
Base DSP Station
Microphone LED
Channel LEDs
Solid yellow Off
Solid red or red Off
blinking
Solid green or solid Off
red
2 RED flashes every 2 RED flashes
second every second
Off Off
Off Off
Two red flashes Two red flashes
every 1.5 seconds every 1.5 seconds
One green flash One green flash
every 1.5 seconds every 1.5 seconds
One red flash every One red flash
1.5 seconds every 1.5 seconds
Solid red Solid red
Alternating slow
green and red
Alternating slow Off
green and red
Alternating red, Off
yellow, green, yellow
2 RED flashes every 2 RED flashes
second every second
Meaning
Battery Type Test
Charging in Progress,
depending on Tray LED
setting
Charging Complete,
depending on Tray LED
setting
Microphone is upgrading its
firmware over the air.
Non-Rechargeable Batteries
Microphone powered off or
battery discharged
Microphone paired and
muted
Microphone paired and "live"
(unmuted)
Microphone paired and
system muted
(ex: tabletop mute)
Pairing mode or
confirmation of powering-
down.
Pairing failed
Microphone not paired
Searching for a connection,
or out of radio range. The
Microphone will try to re-
establish the link for about
15 minutes, and then turn
off automatically.
Microphone is upgrading its
firmware over the air.
92