Yamaha Revolabs Executive Elite 03-ELITEEXEC8-AU Installation And Operation Manual page 15

Revolabs Elite wireless microphone systems are designed to work with other
audio equipment typically found in an installation. This equipment is typically
used for:
 Audio Mixing
 Acoustic echo cancellation (AEC)
 Feedback elimination
 Level control
 Equalization
 Noise cancellation
The Revolabs Elite system provides some of these features as well. It is
recommended to use either external or Revolabs audio control systems to
change settings and adapt the audio to your exact needs. Best audio quality is
easier to attain when only one system is used to adapt the audio.
The Revolabs Elite system is designed to optimize audio capture/reproduction
by providing:
 Consistent audio input from all participants
 Minimize room noise
 Mute control
 Wireless encryption
 Automatic channel selection
 Full duplex audio.
Revolabs wireless microphones and transceivers, receive signals (audio,
commands) from the remote antenna receiver, while sending audio back to the
antenna and the Base DSP unit. There are several different microphone and
microphone adapter types available with the Executive Elite:
 Omni directional tabletop microphone
 Directional (Cardioid) tabletop microphone
 12in Gooseneck tabletop microphone
 6in Gooseneck tabletop microphone
 Wearable Presenter microphone and transceiver
 TA4 microphone adapter (mini-XLR) and transceiver
 XLR microphone adapter and transceiver
To transmit audio, Microphones need to be paired to their receiver and antenna
as described later in this document.
15