TOOLSTATION HAWKSMOOR 44787 User Instructions page 12


Slide the power cord hook into position of unit left.

Installing the spray wand: Fit the Turbo lance or Adjustable spray lance to extension lance to the trigger
gun and rotate them until the three parts are completely locked.

Align the tongues of the Extension lance with the grooves of the lance connection port of the spray gun
and insert it. There is a spring in the connection port of the spray gun. The spring has to be pressed
down and might need some pressure.

Securely fit the Extension lance by turning it clockwise and letting it lock into place.

To remove the Extension lance, press it towards the lance connection port of the spray gun and turn it
anticlockwise to remove it.

Fit the Turbo lance or Adjustable spray lance to Extension lance in the same way of fitting Extension
lance to the trigger gun.

Connect the high-pressure hose to the trigger gun: Push the hose release and hold it in position. Insert
the connector of the pressure hose into the hose connection port of the spray gun. Ensure it snaps in
place. Release the hose release afterwards.
Turbo lance
Adjustable spray lance
Extension lance