Summary of Contents for TOOLSTATION HAWKSMOOR 44787
- Page 1 Original User’s Instructions High-pressure Washer 1400W SKU: 44787 READ BEFORE USE PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE...
-
Page 2: Table Of Contents
CONTENT ⚫ WHAT’S IN THE BOX-------------------------------------------------------------- ------- 3 ⚫ TOOLS REQUIRED------------------------------------------------------------------------ 4 ⚫ SPECIFICATIONS-------------------------------------------------------------------------- 4 ⚫ EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS---------- 5 ⚫ IMPORTANT SAFETY WARNINGS--------------------------------------------------- 6 ⚫ PRODUCT DESCRIPTION AND IDENTIFICATIONS----------------------------- 10 ⚫ ASSEMBLY AND OPERATING INSTRUCTIONS--------------------------------- 11 ⚫... -
Page 3: What's In The Box
WHAT’S IN THE BOX Trigger gun Pressure hose Water hose connecter Foam sprayer Turbo lance Adjustable spray lance Power cord hook Trigger gun holder Extension lance Nozzle cleaning needle Handle Screw x4 Accessories holder Machine body... -
Page 4: Tools Required
TOOLS REQUIRED PH2 Screwdriver SPECIFICATIONS • 230V~50Hz • Max pressure:108Bar(10.8Mpa) • Max flow:7 L/min • Auto stop/start function • On-board accessory storage • 6 m PVC high-pressure hose • 5 m Power cord TECHNICAL DATA Model YLQ4630H-110A Rated Voltage 230V~50Hz Rated Power Rate 1400W Plug... -
Page 5: Explanations And Symbols, Cautions And Warnings
EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS Wear eye protection. Wear protective gloves. Switch the product off and disconnect it from the power supply before assembly, cleaning, adjustments, maintenance, storage and transportation. Wear protective, slip-resistant footwear. Always ensure that other people and pets remain at a safe distance from the product when it is in operation. -
Page 6: Important Safety Warnings
This product is of protection class II. That means it is equipped with enhanced or double insulation. UK Conformity Assessed The product complies with the applicable European directives and an evaluation method of conformity for these directives was done. WEEE symbol. Waste electrical products should not be disposed of with household waste. - Page 7 WARNING: Do not direct the jet against yourself or others in order to clean clothes or foot-wear. WARNING: Risk of explosion – Do not spray flammable liquids. This product shall not be used by children or untrained personnel. ...
- Page 8 if it is missing. Products without rating label must not be used, since they cannot be identified and are potentially hazardous. Never tamper with or adjust the setting of the safety valve or the safety devices. Never change the original diameter of the adjustable nozzle. ...
- Page 9 and these instructions. Ensure that the product is in good condition and well maintained. Use correct accessories for the product and ensure they in good condition. Keep tight grip on the handles/grip surface. Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate).
-
Page 10: Product Description And Identifications
PRODUCT DESCRIPTION AND IDENTIFICATIONS 1. Handle 9. Turbo lance 2. Trigger gun 10. Trigger gun holder 3. On/off switch (“ON/I”/“OFF/O”) 11. Foam sprayer 4. Extension lance 12. Water inlet 5. Power cord hook 13. Trigger gun lever 6. Power cord 14. -
Page 11: Assembly And Operating Instructions
ASSEMBLY AND OPERATING INSTRUCTIONS WARNING! The product and the packaging are not children’s toys! Children must not play with plastic small parts! There is a danger of choking and suffocation! Assemble the pressure washer Unpack all parts and lay them on a flat, stable surface. ... - Page 12 Slide the power cord hook into position of unit left. Installing the spray wand: Fit the Turbo lance or Adjustable spray lance to extension lance to the trigger gun and rotate them until the three parts are completely locked. ...
- Page 13 Connect the high-pressure hose to the water outlet: Connect the other end of the high-pressure hose to the water outlet on the washer and twist the black rotatable end-piece as indicated to secure the connection. Connect the garden hose to the water inlet: Connect the water hose connecter to the water inlet of the pressure washer, then thread your garden hose into the water hose connecter.
- Page 14 Start up the pressure washer Park the appliance on an even surface. Make sure the on/off switch is in its off position “OFF/O”. Connection to water supply. WARNING! Although this product is suitable for attachment to the drinking water supply local regulations may prohibit the connection to drinking water connections! Observe the regulations of your local utility company when connecting the product to a water supply line! If it is prohibited to connect to the drinking water facility, you must use a backflow preventer which corresponds...
- Page 15 Automatic motor start/stop device is operated by the spray gun trigger. When the trigger is released, the dynamic pressure automatically cuts out the motor. When the trigger is depressed the automatic drop in pressure starts the motor and the pressure is restored after a very slight delay. ...
- Page 16 Tips WARNING! Prevent water from penetrating the air vents of the product to minimize the risk of damage to the product and to reduce the risk of electric shock to the operator! When dealing with vertical surfaces work from the bottom upwards. Rinse from the bottom upward, use the high-pressure jet at a minimum distance of 30 cm at 45°...
-
Page 17: Care And Cleaning
CARE AND CLEANING WARNING! Always switch the product off, disconnect the product from the water and power supply and let the product cool down before performing inspection, maintenance and cleaning work! Keep the product clean. Remove debris from it after each use and before storage. ... -
Page 18: Trouble Shooting
TROUBLE SHOOTING Use this section to help you to try and solve any problems you may have: PROBLEM POSSIBLE CAUSES REMIDIES 1. Product does not start 1.1 Not connected to power 1.1 Connect to power supply supply 1.2 Check by a specialist 1.2 Power cord or plug is electrician defective... -
Page 19: Declaration Of Conformity / Performance
Product Description High-pressure Washer 1400W 1. Toolstation Limited, Express Park, Bristol Road, Bridgwater, Somerset TA6 4RN This declaration of conformity is issued under the sole responsibility of Toolstation 2. Object of the declaration The object of the declaration described above is in conformity with the relevant Community harmonization... -
Page 20: Environmental Information
ENVIRONMENTAL INFORMATION The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. -
Page 21: Guarantee
If you are a consumer and you experience a problem with your Toolstation product, which is found to be defective due to faulty materials or workmanship within the Guarantee Period, this Toolstation Guarantee will cover repair or - at the discretion of Toolstation –...
Need help?
Do you have a question about the HAWKSMOOR 44787 and is the answer not in the manual?
Questions and answers
I dropped the pressure washer, no visible signs of damage but it won’t work, any tips please
If your TOOLSTATION HAWKSMOOR 44787 pressure washer won't work after being dropped, do not attempt to open or repair the appliance yourself. Doing so may void the warranty and could cause damage or personal injury. If the problem persists, contact service and support.
This answer is automatically generated