Table of Contents
Advertisement
Peak load / energy
management
Liquid dispensing
connection
Payment device
The Connector Box is supplied with mains voltage by the Miele Pro-
fessional washing machine.
The separately available set consists of the Connector Box and
fasteners for installation on the machine or on the wall.
A peak-load or energy management system can be connected via the
Connector Box.
The energy management system monitors the energy consumption
of a system and deactivates individual pieces of equipment tempor-
arily by means of the peak-load negotiation in order to ensure that
certain total load limits are not exceeded.
When the peak-load function is activated, the heating is deactivated
and the programme stopped. A message appears in the display to in-
form you of this.
The programme is resumed automatically when the peak-load func-
tion finishes.
External liquid dispensing pumps with a "container empty" indicator
and/or flowmeter can be used via the Connector Box to dispense li-
quid detergents.
The dispensing pumps can only be programmed by the Miele Cus-
tomer Service Department.
It is particularly important to follow the manufacturer's instructions
when using a combination of cleaning agents and special application
products.
The washing machine can be fitted with a single-machine payment
system as an optional accessory via the Connector Box.
The programming required for connecting a payment system can be
carried out during the initial commissioning process. After initial com-
missioning, changes may only be carried out by your Miele dealer or
the Miele Customer Service Department.
Please note that the status of the Connector Box must be set to
"on" in the supervisor level as required.
Installation
65
Advertisement
Table of Contents
