Table of Contents
Advertisement
Removal steps of the LCD hinges
Table 10. Screw specification
Step
Screw (quantity)
1
M2.5 × 3.5 mm, flat-head, nylon-coated (6)
2030 LCD panel and elastic adhesive tapes
For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 60
• "1170 LCD unit (for selected models)" on page 79
• "2010 LCD bezel sheet and LCD bezel" on page 81
Removal steps of LCD panel and elastic adhesive tapes
1. Pull out each tape slowly in the direction as shown until the adhesive tapes are all released from LCD
unit.
Note: Do not pull the tapes too fast, otherwise, the tapes might snap.
Torque
Color
Black
0.294 Nm
(3.0 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
83
Advertisement
Table of Contents
