1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Laptop
  5. 21FC002MGE
  6. Hardware maintenance manual

Lenovo 21FC002MGE Hardware Maintenance Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ThinkPad P16v Gen 1
Hardware Maintenance Manual

Advertisement

Table of Contents
loading

Related Manuals for Lenovo 21FC002MGE

Summary of Contents for Lenovo 21FC002MGE

  • Page 1 ThinkPad P16v Gen 1 Hardware Maintenance Manual...
  • Page 2 First Edition (June 2023) © Copyright Lenovo 2023. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-...

  • Page 3: Table Of Contents

    Sleep mode ....FRU....61 © Copyright Lenovo 2023...
  • Page 4 General guidelines ....1140 Smart card reader and cable (for selected models) ....Before servicing the computer .

  • Page 5: About This Manual

    Some statements in this manual might not be applicable to the computer. • Before servicing a product, be sure to read all the information under Chapter 1 “Safety information” on page 1 and Chapter 2 “Important service information” on page 19. © Copyright Lenovo 2023...
  • Page 6 ThinkPad P16v Gen 1 Hardware Maintenance Manual...

  • Page 7: Chapter 1. Safety Information

    • Fan louvers on the machine help to prevent overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers. Electrical safety Observe the following rules when working on electrical equipment. © Copyright Lenovo 2023...
  • Page 8 Important: • Use only approved tools and test equipment. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. • Many customers have, near their equipment, rubber floor mats that contain small conductive fibers to decrease electrostatic discharges (ESD).

  • Page 9: Safety Inspection Guide

    4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-ThinkPad / non-Lenovo alterations. Use good judgment as to the safety of any non-ThinkPad / non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.

  • Page 10: Grounding Requirements

    2. Ensure that the ESD protective devices you use have been certified (ISO 9000) as fully effective. When handling ESD-sensitive parts: • Keep the parts in protective packages until they are inserted into the product. • Avoid contact with other people. •...
  • Page 11 DANGER DANGER DANGER DANGER DANGER DANGER Chapter 1 Safety information...
  • Page 12 ThinkPad P16v Gen 1 Hardware Maintenance Manual...
  • Page 13 PERIGO PERIGO PERIGO Chapter 1 Safety information...
  • Page 14 PERIGO PERIGO PERIGO PERIGO PERIGO DANGER DANGER ThinkPad P16v Gen 1 Hardware Maintenance Manual...
  • Page 15 DANGER DANGER DANGER DANGER DANGER Chapter 1 Safety information...
  • Page 16 DANGER VORSICHT VORSICHT VORSICHT VORSICHT ThinkPad P16v Gen 1 Hardware Maintenance Manual...
  • Page 17 VORSICHT VORSICHT VORSICHT VORSICHT Chapter 1 Safety information...
  • Page 18 ThinkPad P16v Gen 1 Hardware Maintenance Manual...
  • Page 19 Chapter 1 Safety information...
  • Page 20 ThinkPad P16v Gen 1 Hardware Maintenance Manual...
  • Page 21 Chapter 1 Safety information...
  • Page 22 ThinkPad P16v Gen 1 Hardware Maintenance Manual...
  • Page 23 Chapter 1 Safety information...
  • Page 24 ThinkPad P16v Gen 1 Hardware Maintenance Manual...

  • Page 25: Chapter 2. Important Service Information

    – “FRU identification” on page 20 Important: • Advise customers to contact the Lenovo Customer Support Center if they need any assistance in obtaining or installing any software fixes, drivers, and UEFI BIOS downloads. Telephone numbers for Lenovo Support are available at: https://pcsupport.lenovo.com/supportphonelist...

  • Page 26: How To Use Error Message

    Dynamic Configure To Order (CTO) model This model provides the ability for a customer to configure a Lenovo solution from a Web Site, and have this configuration sent to fulfillment, where it is built and shipped directly to the customer. The machine label and eSupport will load these products as the 4-character MT, 4-character model, and 2-character country code.

  • Page 27: Chapter 3. General Checkout

    Before checking problems with the computer, determine whether the damage is covered under the warranty by referring to the following list: © Copyright Lenovo 2023...

  • Page 28: Checkout Guide

    Note: If you are unable to isolate and repair the problem yourself after running the program, save and print the log files created by the program. You need the log files when you speak to a Lenovo technical support representative.

  • Page 29: Quick Test Programs

    Run quick test programs to troubleshoot and resolve computer problems, especially when the computer does not have the Vantage app installed. To download and install a quick test program, go to https://www.lenovo.com/diags , and follow the instructions on the Web site.

  • Page 30: Bootable Diagnostic Programs

    If the computer you are servicing is not installed with the UEFI diagnostic program, you can download a bootable diagnostic program from the Lenovo Support Web site. The bootable diagnostic program enables you to view system information and test some hardware devices in your computer, such as memory, storage devices, the LCD, and system board buses.

  • Page 31: Checking The Ac Power Adapter

    Checking the built-in battery and operational charging This system supports only batteries specially designed for this specific system and manufactured by Lenovo or an authorized manufacturer. The system does not support unauthorized batteries or batteries designed for other systems.
  • Page 32 5. Measure the voltage of the battery. See the following figure. Wire Voltage (V dc) +2.5 to +3.2 Black Ground • If the voltage is correct, replace the system board. • If the voltage is not correct, replace the coin-cell battery. •...

  • Page 33: Chapter 4. Related Service Information

    When the latest maintenance diskette and the system program service diskette become available, they will be posted on: https://support.lenovo.com Reset or restore Windows To reset or restore Windows, refer to the information below： • Use Lenovo recovery options. 1. Go to https://support.lenovo.com/HowToCreateLenovoRecovery 2. Follow the on-screen instructions. • Use Window recovery options.

  • Page 34: Supervisor Password

    The system management password can also protect the system information stored in UEFI BIOS like a supervisor password, but it has lower authority by default. The system management password can be set through the UEFI BIOS menu or through Windows Management Instrumentation (WMI) with the Lenovo client-management interface.

  • Page 35: How To Remove The Power-On Password

    Lenovo cannot reset your passwords or recover data from the storage drive. You can contact a Lenovo authorized service provider to have the storage drive replaced. A fee will be charged for parts and service. If the storage drive is a CRU (Customer Replaceable Unit), you can also contact Lenovo to purchase a new storage drive to replace the old one by yourself.

  • Page 36: Power Management

    7. Reinstall the built-in battery. 8. Reinstall the base cover assembly. 9. Reconnect ac power. 10. Turn on the computer and wait until the POST ends. After the POST ends, the password prompt does not appear. The system management password has been removed. If a supervisor password has been set and is known to the service technician, do the following to remove the system management password: 1.

  • Page 37: Symptom-To-Fru Index

    • The system is powered off. Note: If the computer enters the hibernation mode while it is connected to the dock, do not disconnect it before resuming normal operation. If you do disconnect it and then try to resume normal operation, you will get an error message, and you will have to restart the system.

  • Page 38: Numeric Error Codes

    Numeric error codes Symptom or error FRU or action, in sequence 0177 Replace the system board. Bad SVP data, stop POST task—The checksum of the supervisor password in the EEPROM is not correct. 0183 1. Run the ThinkPad Setup program. The settings Bad CRC of Security Settings in EFI Variable.

  • Page 39: Error Messages

    Beep errors Lenovo SmartBeep technology enables you to decode beep errors with your smartphone when a black screen occurs with beeps from your computer. To decode the beep error with Lenovo SmartBeep technology, do the following: 1.
  • Page 40 The following section describes some beep errors and the corresponding solutions. Note: Do not attempt to service a product yourself unless instructed to do so by the Customer Support Center or product documentation. Only use a Lenovo-authorized service provider to repair your product. Error codes...

  • Page 41: Beep Symptoms

    Error codes Solutions 0287: Discrete graphics error 1. Reinstall or replace the discrete graphics card (service provider only). 2. If step 1 does not work, replace the system board (service provider only). 1. Reconnect the display cable on both the system board side and the computer display side (service provider only) and check the LCD panel.

  • Page 42: Lcd-Related Symptoms

    If the LCD you are servicing has two or less visible defective pixels, it should not be considered faulty. However, if the LCD has three or more visible defective pixels, it will be deemed as defective by Lenovo and it should be replaced.

  • Page 43: Intermittent Problems

    Table 4. LCD-related symptoms FRU or action, in sequence Symptom or error No beep, power-on indicator on, and a blank LCD during 1. Run LCD Self Test. POST. 2. Replace the system board. • LCD backlight not working. 1. Reseat the LCD connectors. •...
  • Page 44 ThinkPad P16v Gen 1 Hardware Maintenance Manual...

  • Page 45: Chapter 5. Raid

    • How to enter the Intel RST configuration utility • How to create RAID volumes • How to delete RAID volumes • How to reset storage drives to non-RAID • How to rebuild RAID 1 or RAID 5 volumes © Copyright Lenovo 2023...

  • Page 46: Enter The Intel Rst Configuration Utility

    Enter the Intel RST configuration utility 1. Ensure that RAID is enabled in the UEFI BIOS menu: a. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu. b. Select Config ➙ Storage ➙ VMD Controller ➙ On and then press Enter. c.

  • Page 47: Reset Storage Drives To Non-Raid

    4. When prompted, select Yes to confirm the deletion of the selected RAID volume. After you delete the RAID volume, the Intel (R) Rapid Storage Technology window is displayed. Member drives of the deleted volume are displayed under Non-RAID Physical Disks. 5.
  • Page 48 3. Select Rebuild and press Enter to open the Rebuild Volume window. 4. Select the drive that you want to rebuild and press Enter to initiate the rebuild process. After you initiate the rebuild process, the Intel (R) Rapid Storage Technology window is displayed. The RAID 5 volume under rebuilding is displayed under RAID Volumes with a Rebuilding mark.

  • Page 49: Chapter 6. Special Keys

    Open notification center ® Answer incoming calls on Microsoft Teams Decline incoming calls on Microsoft Teams Customize the function of this key on the Vantage app Function as Insert Key Open Magnifier Open calculator Enter sleep mode © Copyright Lenovo 2023...
  • Page 50 Key / Key combination Function Open Snipping Tool Toggle keyboard backlight (for selected models) Break operation Pause operation Scroll contents Send system request Enter sleep mode To wake up the computer, press Fn or the power button. Go to beginning Go to end ThinkPad P16v Gen 1 Hardware Maintenance Manual...

  • Page 51: Chapter 7. Locations

    Chapter 7. Locations Locating computer controls and connectors Front Description Description Item Item Microphone Infrared camera / Camera Webcam privacy shutter Touch screen ® Power button with fingerprint reader TrackPoint pointing stick © Copyright Lenovo 2023...

  • Page 52: Left And Right

    Description Description Item Item NFC (near field communication) mark Trackpad Speaker TrackPoint buttons * for selected models Left and right Description Description Item Item HDMI™ connector SD card reader Nano-SIM-card tray Smart-card slot Always on USB-A 3.2 Gen 1 connector Audio connector Security-lock slot USB-A 3.2 Gen 1 connector...

  • Page 53: Rear

    Rear Intel models Description Description Item Item ® USB-C (Thunderbolt™ 4) connector Power connector AMD models Description Description Item Item USB-C (USB 4) connector Power connector Bottom Emergency-reset hole Chapter 7 Locations...

  • Page 54: Locating Frus And Crus

    Lenovo will ship the CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. You can find a list of CRUs for your product in this Hardware Maintenance Manual. An electronic version of this manual can be found at .

  • Page 55: Major Frus And Crus

    Major FRUs and CRUs Chapter 7 Locations...
  • Page 56 Smart card reader cable* NFC board* NFC cable* Trackpad cable Trackpad Keyboard Lenovo factory recovery USB key* Power cord ac power adapter Miscellaneous parts kits (see “Miscellaneous parts” on page 53) * for selected models ThinkPad P16v Gen 1 Hardware Maintenance Manual...

  • Page 57: Lcd Frus And Crus

    Notes: • Depending on the computer model, your computer might look different from the illustration above. • The Lenovo factory recovery USB key is used to restore the Microsoft Windows operating system. It might not come with the computer, and a user might order it from https://pcsupport.lenovo.com/...
  • Page 58 Table 6. LCD FRUs and CRUs FRU description Self-service Optional-service LCD bezel LCD panel with or without Xrite Non-camera-and-microphone rubber* Microphone cable* Microphone rubbers* Microphone board* Camera and LED cable* Microphone rubbers on camera module* Camera module* LCD hinges LCD cover assembly Note: For WLAN models，it comes with two pieces of sponges attached to the LCD cover.

  • Page 59: Miscellaneous Parts

    • Spec Connector and cable guide This topic provides information to help Lenovo authorized service technicians identify connectors and cables for replacement purpose. To view each FRU and the exploded illustration of the computer, see “Major FRUs and CRUs” on page 49 and “LCD FRUs and CRUs” on page 51.
  • Page 60 Table 8. System board connector and cable guide Connector/feature Internal cable required Cable connection Intel models: USB-C (Thunderbolt Connect a USB-C compatible or 4) connector (external) Thunderbolt 4 compatible device AMD models: USB-C (USB 4) to this connector. connector (external) Intel models: USB-C (Thunderbolt Connect a USB-C compatible or 4) connector (external)

  • Page 61: Looking Up Fru Information

    Keyboard connector (internal) Keyboard assembly cable The keyboard assembly comes with the cable. Connect the cable to this connector. Looking up FRU information For detailed FRU information, including part numbers, descriptions, and substitution part numbers, go to: https://support.lenovo.com/partslookup Chapter 7 Locations...
  • Page 62 ThinkPad P16v Gen 1 Hardware Maintenance Manual...

  • Page 63: Chapter 8. Fru Replacement Notices

    • Keep the screw kit in your tool bag. For the part number of the screw kit, go to: https://support.lenovo.com/partslookup Tighten screws as follows: • Plastic to plastic Turn an additional angle of 90 degrees after the screw head touches the surface of the plastic part. © Copyright Lenovo 2023...

  • Page 64: Retaining Serial Numbers

    Maintenance Key. Note: Only an authorized Lenovo service technician can access the above Web site. 3. Restart the computer. 4. When the logo is displayed, press Esc. The ThinkPad Config Information Update Utility interface is displayed.

  • Page 65: Retaining The Uuid

    To check what ECAs have been previously applied to the machine, use the ECA Information Read/Write function on the LENOVO ThinkPad Hardware Maintenance Diskette or Maintenance Key. 1. Insert the latest version of LENOVO ThinkPad Hardware Maintenance Diskette or Maintenance Key, and then restart the computer.
  • Page 66 Note: Only the ECA number is stored in the EEPROM. The machine type of the ECA is assumed to be the same as the machine type of the machine that had the ECA applied to it. 1. Insert the latest version of LENOVO ThinkPad Hardware Maintenance Diskette or Maintenance Key, and then restart the computer.

  • Page 67: Chapter 9. Removing Or Replacing A Fru

    2. Click Power Options, and then click Choose what the power buttons do on the left pane. 3. Click Change settings that are currently unavailable at the top. 4. If prompted by User Account Control (UAC), click Yes. © Copyright Lenovo 2023...

  • Page 68: Removing The Nano-Sim-Card And Nano-Sim-Card Tray

    5. Clear the Turn on fast startup check box, and then click Save changes. To disable the built-in battery: 1. Restart your computer. When the logo screen is displayed, immediately press F1 to enter the UEFI BIOS menu. 2. Select Config ➙ Power. The Power submenu is displayed. 3.
  • Page 69 When installing: Configure the keyboard language in UEFI BIOS: 1. Enter the UEFI BIOS menu. 2. Click Config ➙ Keyboard/Mouse ➙ Keyboard Layout, and then select the keyboard language. Chapter 9 Removing or replacing a FRU...

  • Page 70: 1020 Base Cover Assembly

    1020 Base cover assembly For access, remove this FRU: • “Removing the nano-SIM-card and nano-SIM-card tray” on page 62 Removal step of the base cover assembly ThinkPad P16v Gen 1 Hardware Maintenance Manual...

  • Page 71: 1030 Memory Module

    Applying labels to the base cover assembly Notes: • Depending on the country or region of delivery, the labels might be slightly different from the ones in the following illustration. • The new base cover assembly FRU is shipped with a kit containing labels of several kinds. Apply those labels when you replace the base cover assembly.

  • Page 72: 1040 M.2 Solid-State Drive, Bracket, And Thermal Pad

    Removal steps of the memory module When installing: Install the memory in the slot first. Note: Memory module replacement might cause memory retraining during POST. When memory retraining occurs, the screen might be blank. You might see the LED indicators on Esc, F1, and F4 blinking sequentially to indicate the progress.
  • Page 73 Note: If the app is uninstalled, reinstall it by downloading the installation package from https:// support.lenovo.com/us/en/downloads/DS540353 2. Go to Settings ➙ Restore profiles. The app will download and install its unique color profiles from Lenovo cloud automatically. Chapter 9 Removing or replacing a FRU...

  • Page 74: 1050 Built-In Battery

    1050 Built-in battery DANGER Use only the Lenovo authorized battery specified for the computer. Any other battery could ignite or explode. Important notice for replacing a battery Attention: Lenovo has no responsibility for the performance or safety of unauthorized batteries, and provides no warranties for failures or damage arising out of their use.

  • Page 75: 1060 Wireless Wan Card (For Selected Models)

    1060 Wireless WAN card (for selected models) For access, remove this FRU: • “Removing the nano-SIM-card and nano-SIM-card tray” on page 62 • “1020 Base cover assembly” on page 64 Removal steps of the wireless WAN card Step Screw (quantity) Color Torque Black...
  • Page 76 Removal steps of the thermal fan assembly When installing: • Ensure that the connectors are attached firmly. • Do not press the top of the fan cover and the fan hub. • Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on the parts marked as shown in the following illustrations.

  • Page 77: 1080 I/O Bracket

    (1.85 kgf-cm) 1090 Coin-cell battery DANGER Use only the Lenovo authorized battery specified for the computer. Any other battery could ignite or explode. For access, remove these FRUs in order: • “Removing the nano-SIM-card and nano-SIM-card tray” on page 62 •...

  • Page 78: 1100 Keyboard Bezel Assembly

    Removal steps of the coin-cell battery When installing: • Ensure that the connector is attached firmly. • Reset the system date and time in the BIOS menu. 1100 Keyboard bezel assembly For access, remove these FRUs: • “Removing the nano-SIM-card and nano-SIM-card tray” on page 62 •...

  • Page 79: 1110 Power Button With Fingerprint Reader And Bracket

    Note: Remove the keyboard bezel assembly carefully. When installing: Ensure that the connectors and latches are attached firmly. 1110 Power button with fingerprint reader and bracket For access, remove this FRU: • “Removing the nano-SIM-card and nano-SIM-card tray” on page 62 •...

  • Page 80: 1120 Trackpad And Trackpad Cable

    Removal steps of the power button with fingerprint reader and bracket Step Screw (quantity) Color Torque Black 0.181 Nm M2 × 3 mm, flat-head, nylon-coated (2) (1.85 kgf-cm) 1120 Trackpad and trackpad cable For access, remove these FRUs in order: •...
  • Page 81 Removal steps of the trackpad cable Removal steps of the trackpad Note: There might exist a waterproof mylar covering the trackpad, remove the mylar before replacement. • NFC models Step Screw (quantity) Color Torque 0.1 Nm M1.6 × L1.8 mm, flat-head, nylon-coated (7) Silver (1.1 kgf-cm) Chapter 9...
  • Page 82 • Non-NFC models Step Screw (quantity) Color Torque M1.6 × L1.8 mm, flat-head, nylon-coated (7) Silver 0.1 Nm (1.1 kgf-cm) When installing: 1. A trackpad jig might come with the trackpad which is used for fixing the location of the trackpad. Attach the trackpad jig to the trackpad and bend the four angles as shown by arrows below.

  • Page 83: 1130 Nfc Cable And Nfc Board (For Selected Models)

    2. Install the trackpad with jig as shown and install the screws to fix the trackpad. 3. Remove the Jig. Notes: • A mylar might cover the trackpad, and ensure that you attach the mylar to the trackpad after replacement. •...

  • Page 84: 1140 Smart Card Reader And Cable (For Selected Models)

    • “1050 Built-in battery” on page 68 • “1080 I/O bracket” on page 71 • “1100 Keyboard bezel assembly” on page 72 Removal steps of the NFC cable and NFC board 1140 Smart card reader and cable (for selected models) For access, remove these FRUs in order: •...

  • Page 85: 1150 Speaker Assembly

    Removal steps of the smart card reader and cable Torque Step Screw (quantity) Color M1.6 × L1.8 mm, flat-head, nylon-coated (4) Silver 0.1 Nm (1.1 kgf-cm) When installing: Ensure that the connectors are attached firmly. 1150 Speaker assembly For access, remove these FRUs in order: •...

  • Page 86: 1160 Wireless Wan Antennas (For Selected Models)

    Removal steps of the speaker assembly Step Screw (quantity) Color Torque Black 0.181 Nm M2 x 2 mm, flat-head, nylon-coated (3) (1.85 kgf-cm) When installing: • Ensure that the connector is attached firmly. • Ensure that the cable is routed properly. 1160 Wireless WAN antennas (for selected models) For access, remove these FRUs: •...
  • Page 87 Removal steps of the wireless WAN antennas Step Screw (quantity) Color Torque M2 × 4 mm, flat-head, nylon-coated (4) Black 0.181 Nm (1.85 kgf-cm) When installing: Ensure that the connector is attached firmly. Chapter 9 Removing or replacing a FRU...

  • Page 88: 1170 System Board

    • After replacing the system board, use the Maintenance Utility to bind the model type, serial number, and Brand ID of the computer with the new system board. Refer to https://support.lenovo.com/us/en/solutions/ for instructions on how to do that. As an alternative, you also can use the Golden Key U1 tool HT506954 for that purpose.
  • Page 89 Removal steps of the system board Turn over the computer and disconnect the cables. Chapter 9 Removing or replacing a FRU...

  • Page 90: 1180 Lcd Hinge Caps

    Step Screw (quantity) Color Torque M2 × 4 mm, flat head, nylon-coated (3) Black 0.181 Nm (1.85 kgf-cm) When installing: • Ensure that the WWAN cable guide rubber is installed back to the system board in place. • Ensure that the mylar on M.2 solid-state drive thermal pad , memory absorber and wireless WAN card absorber are installed in place.

  • Page 91: 1190 Lcd Unit

    Removal steps of the LCD hinge caps Table 9. Screw specification Step Screw (quantity) Color Torque M2 × 3 mm, flat-head, nylon-coated (2) Black 0.181 Nm (1.85 kgf-cm) 1190 LCD unit For access, remove this FRU: • “Removing the nano-SIM-card and nano-SIM-card tray” on page 62 •...
  • Page 92 Step Screw (quantity) Color Torque M2.5 × 4.5mm, flat-head, nylon-coated (4) Black 0.294 Nm (3.0 kgf-cm) When installing: Ensure that the connectors are attached firmly. Attention: When you route the cables, ensure that they are not subject to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

  • Page 93: 1200 Chassis Assembly

    1200 Chassis assembly For access, remove this FRU: • “1010 Keyboard” on page 62 • “Removing the nano-SIM-card and nano-SIM-card tray” on page 62 • “1020 Base cover assembly” on page 64 • “1030 Memory module” on page 65 • “1040 M.2 solid-state drive, bracket, and thermal pad” on page 66 •...

  • Page 94: 2020 Lcd Panel And Elastic Adhesive Tapes

    When installing: Ensure that all the latches are attached firmly. 2020 LCD panel and elastic adhesive tapes For access, remove these FRUs in order: • “Removing the nano-SIM-card and nano-SIM-card tray” on page 62 • “1020 Base cover assembly” on page 64 •...

  • Page 95: 2030 Lcd Hinges

    2. Go to Settings ➙ Restore profiles. The app will download and install its unique color profiles from Lenovo cloud automatically. 2030 LCD hinges For access, remove these FRUs in order: • “Removing the nano-SIM-card and nano-SIM-card tray” on page 62 •...

  • Page 96: 2040 Camera-And-Microphone Module And Cable (For Selected Models)

    Removal steps of the LCD hinges Table 10. Screw specification Step Screw (quantity) Color Torque M2.5 × 4.5 mm, flat-head, nylon-coated (6) Black 0.294 Nm (3.0 kgf-cm) 2040 Camera-and-microphone module and cable (for selected models) For access, remove these FRUs in order: •...
  • Page 97 Remove the microphone rubbers. • For models with microphone only Chapter 9 Removing or replacing a FRU...

  • Page 98: 2050 Wireless Lan And Wireless Wan Mimo Antenna Assembly (For Selected Models)

    Remove the microphone rubbers. 2050 Wireless LAN and Wireless WAN MIMO antenna assembly (for selected models) For access, remove these FRUs in order: • “Removing the nano-SIM-card and nano-SIM-card tray” on page 62 • “1020 Base cover assembly” on page 64 •...
  • Page 99 • “1050 Built-in battery” on page 68 • “1080 I/O bracket” on page 71 • “1100 Keyboard bezel assembly” on page 72 • “1180 LCD hinge caps” on page 84 • “1070 Thermal fan assembly” on page 69 • “1190 LCD unit” on page 85 •...
  • Page 100 Turn over the computer and install the cables on wireless WWAN card as shown below. ThinkPad P16v Gen 1 Hardware Maintenance Manual...

  • Page 101: 2060 Lcd Cover Assembly

    Antenna locations Wireless LAN mian antenna (gray) Wireless WAN MIMO 1 antenna* (white and gray) Wireless WAN MIMO 2 antenna* (black and gray) Wireless LAN auxiliary antenna (black) Wireless WAN main antenna* (orange) Wireless WAN auxiliary antenna* (blue) * for selected models 2060 LCD cover assembly For access, remove these FRUs in order: •...
  • Page 102 • “1190 LCD unit” on page 85 • “2010 LCD bezel” on page 87 • “2020 LCD panel and elastic adhesive tapes” on page 88 • “2030 LCD hinges” on page 89 • “2040 Camera-and-microphone module and cable (for selected models)” on page 90 •...

  • Page 103: Appendix A. Notices

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
  • Page 104 Trademarks Lenovo, Lenovo logo, ThinkPad, ThinkPad logo, TrackPoint, and UltraConnect are trademarks of Lenovo. Intel and Thunderbolt are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries. Microsoft, Microsoft Teams, Windows, BitLocker, and Cortana are trademarks of the Microsoft group of companies.

  • Page 105: Appendix B. Abbreviation Table

    Electrically Erasable Programmable Read-Only Memory Extensible Firmware Interface Electrostatic discharge Field Replaceable Unit General Announce Variant Integrated circuits Liquid Crystal Display Machine type and model POST Power-on self-test RFID Radio-frequency identification Supervisor password UUID Universally unique identifier © Copyright Lenovo 2023...
  • Page 106 ThinkPad P16v Gen 1 Hardware Maintenance Manual...
  • Page 108 Part Number: SP40T10713 Printed in China (1P) P/N: SP40T10713 *1PSP40T10713*...

This manual is also suitable for:

Thinkpad p16v gen 121fc002lge21fc000vge-campus21fc000qge-campus21fc002lge-campus21fc0011ge-campus ... Show all

Table of Contents